CHARX PS-M2/825DC/1000DC/30KW - DC power module Phoenix Contact

Mã sản phẩm: 1296467

CHARX power basic, Fast charging module for setting up DC charging stations, 19" rack mounting, CAN bus, output: 150 V DC...1000 V DC / 0 A...100 A

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

DC operation
Input voltage range	300 V DC ... 825 V DC
Derating	< 650 V DC ... 300 V DC (46 W/V)
Nominal input voltage range	650 V DC ... 825 V DC
Input current	48 A (650 V DC)
Input current		38 A (825 V DC)
Inrush current limitation	< 60 A
Insulation resistance	> 10 MΩ
Supply system configuration	DC grid (DC±, PE)

Efficiency	> 95 % (P_Out >50%)
Output voltage range	150 V DC ... 1000 V DC
Output current range	0 A ... 100 A
Nominal power	30 kW
Power dissipation standby	< 14 W
Protection against overvoltage at the output (OVP)	> 1040 V DC
Derating	> 45 °C ... 55 °C (1.2 A/K)
		> 55 °C (3.2 A/K)
		> 55 °C (1 kW/K)
Control deviation	< 0.5 % (Voltage deviation static load change 20% ... 100%)
		< 1 % (Current deviation Static load change 20 % ... 100 %)
		± 0.2 % (Input voltage change ±20 %)
Switch-on delay	< 8 s
Overshoot behavior	± 3 % (Switch-on procedure)

Battery technology

Li-Ion

Interface	CAN bus
Number of interfaces	1
Connection method	2x RJ45 (pin assignment, CANopen standard)
Locking	Locking clip
Transmission physics	Twisted-Pair
Topology	Line (daisy-chain connection)
Transmission speed	125 kbps
Transmission length	max. 20 m
Supported protocols	CAN 2.0B
Electrical isolation	yes (primary/secondary)
Electrical isolation		no (PE)
Number of power modules as CAN bus devices	max. 48 (within one CHARX control controller)
Termination resistor	120 Ω (Terminating the end device)

Electrical isolation between input and output	yes
Insulation voltage input/output	2121 V DC
Insulation voltage input, output / housing	2121 V DC
Insulation voltage input, output/signal, communication	4242 V DC
Insulation voltage signal, communication/housing	707 V DC

Product type	DC power module
Product family	CHARX power basic
MTBF (IEC 61709, SN 29500)	> 300000 h
Service life	40000 h (40 °C)
Service life		70000 h (40 °C, fan)
Internal fan	yes
Flow direction	from front to back
Insulation characteristics
Protection class	I
Pollution degree	2

Mounting type

19" rack mounting

Housing material

Zn-Al alloy

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 70 °C
Ambient temperature (storage/transport)	-40 °C ... 70 °C
Overtemperature protection (OTP)	> 75 °C
Maximum altitude	≤ 4000 m (Derating >2000 m: 10% / 1000 m)
Permissible humidity (operation)	≤ 95 % (non-condensing)
Noise level	< 60 dB (1 m)

Overvoltage category
IEC 60664-1	II
Electric vehicle conductive charging system - Part 1: General requirements
Standards/specifications	IEC 61851-1
Electric vehicle conductive charging system – Part 23: DC electric vehicle charging station
Standards/specifications	IEC 61851-23