CBB 08 2X4RC-PT - Potential distributors Phoenix Contact

Mã sản phẩm: 2905240

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

Device circuit breaker boards for eight thermomagnetic (CB TM1...) or electronic (CB E1... NO) circuit breakers with group remote signaling, central supply, connection for relay contacts, and potential distribution for up to four loads per channel.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Type	DIN rail module, two-section, divisible
Product type	Device circuit breaker board
Number of positions	1
No. of channels	8
Insulation characteristics
Protection class	III
Overvoltage category	II
Degree of pollution	2

No. of channels	8
Maximum load current	60 A (Complete main circuit)
Maximum current with single arrangement	12 A (per channel)
General
Rated surge voltage	0.5 kV
Short circuit stability	600 A (conditional according to DIN EN 50178)
Power dissipation	4.9 W (without circuit breaker)
Insertion/withdrawal cycles	50
Main circuit
Rated voltage	24 V DC
Rated current I_N	60 A DC (total)
Rated current I_N		12 A DC (per channel)
Remote indication circuit
Rated voltage	24 V DC
Rated current I_N	0.5 A DC

Maximum load current	60 A (Complete main circuit)
Supply X21
Connection method	Push-in connection
Stripping length	18 mm
Conductor cross section rigid	0.75 mm² ... 16 mm²
Conductor cross section AWG	20 ... 4
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.75 mm² ... 10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	0.75 mm² ... 16 mm²
Outputs X1 ... X8
Connection method	Push-in connection
Stripping length	10 mm
Conductor cross section rigid	0.2 mm² ... 4 mm²
Conductor cross section AWG	24 ... 12
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.25 mm² ... 1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	0.25 mm² ... 2.5 mm²
Remote signaling X31
Connection method	Push-in connection
Stripping length	10 mm
Conductor cross section rigid	0.2 mm² ... 4 mm²
Conductor cross section AWG	24 ... 12
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.25 mm² ... 1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	0.25 mm² ... 2.5 mm²

Dimensional drawing
Width	170 mm
Height	127.8 mm
Depth	70.8 mm

Material	PA 6
Material		FR4-21
Flammability rating according to UL 94	V0
Housing material	PA 6

Mechanical data
Open side panel	No

Ambient conditions
Degree of protection	IP20 (Terminal blocks and fuse holders)
Degree of protection		IP00 (PCB)
Ambient conditions	A, B
Ambient temperature (operation)	-30 °C ... 60 °C (at 48 A, see derating)
Ambient temperature (storage/transport)	-30 °C ... 80 °C
Humidity test	96 h, 93 % RH, 40 °C

Standards/specifications	DIN EN 50178
Standards/specifications	DIN EN 61000-6-2:2005
Standards/specifications	DIN EN 61000-6-3:2007+A1:2011
Standards/specifications	DIN˽EN 60068-2-6