CAPAROC PM S-R EX - Power module Phoenix Contact

Mã sản phẩm: 1344363

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

Power module with status output and reset input for supplying the CAPAROC circuit breaker system with 12 V DC or 24 V DC. EX e approval for zone 2. For DIN rail installation via the CAPAROC current rails.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General
Note	LABS release – in accordance with test specification VW PV 3.10.7:2005-0
		When connecting the conductor, make sure that the CAPAROC modules are not pulled apart due to tensile force. Gaps must not be created between the modules.
		Observe the specified conditions for use in potentially explosive areas. Install the device in a suitable approved housing with at least IP54 degree of protection that meets the requirements of IEC/EN 60079-0. Also observe the requirements of IEC/EN 60079-14.

Type	Plug-in module
Product type	Device circuit breakers
Product family	CAPAROC
Number of slots	2
Insulation characteristics
Protection class	III
Pollution degree	2

General
Operating voltage	10 V DC ... 30 V DC
Rated voltage	12 V DC
Rated voltage		24 V DC
Rated current I_N	45 A DC (Total current input)
Rated surge voltage	0.5 kV
Tripping method	E (electronic)
Dielectric strength	35 V DC (Load circuit)
Efficiency	> 99 %
Closed circuit current I₀	typ. 9 mA (no load at 24 V)
Power dissipation	typ. 0.22 W (no load at 24 V)
Power dissipation		< 1.5 W (in nominal operation at 24 V and 45 A)
Temperature derating	45 A (Total current at 40°C)
Temperature derating		30 A (Total current at 65 °C)
MTBF (IEC 61709, SN 29500)	18886912.65 h (at 25 °C with 21 % load)
		5907048.64 h (at 40°C with 34.25% load)
		933563.97 h (at 40°C with 100% load)
Voltage drop	0.03 V (at 45 A)
Reset
Input voltage range	7 V DC ... 30 V DC (Reset with falling edge)
Current consumption	typ. 0.5 mA (at 24 V DC)
Pulse length	≥ 50 ms
Stripping length	8 mm
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.2 mm² ... 0.75 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	0.2 mm² ... 1.5 mm²
Status output
Output voltage	max. 30 V DC (Input voltage ±5% in the event of no error)
Output voltage		0 V DC (Error)
Output current	max. 20 mA
Stripping length	8 mm
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.2 mm² ... 0.75 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	0.2 mm² ... 1.5 mm²
Status output
Output voltage	max. 30 V DC (Input voltage ±5% when I >80% at at least one channel)
Output current	max. 20 mA
Stripping length	8 mm
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.2 mm² ... 0.75 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	0.2 mm² ... 1.5 mm²

Main circuit IN+
Connection method	Push-in connection
Stripping length	18 mm
Conductor cross section rigid	0.5 mm² ... 16 mm²
Conductor cross section AWG	20 ... 8
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.5 mm² ... 16 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	0.5 mm² ... 16 mm²
Main circuit IN-
Connection method	Push-in connection
Stripping length	18 mm
Conductor cross section rigid	0.5 mm² ... 16 mm²
Conductor cross section AWG	20 ... 8
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.5 mm² ... 16 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	0.5 mm² ... 16 mm²

Power (PWR) LED green	lit (with no channel errors)
		lit (Supply voltage in the nominal range)
		flashing (3 x on deactivation of programming lock)
Power (PWR) LED red	lit (Supply voltage outside the nominal range)

Dimensional drawing
Width	12.4 mm
Height	132.4 mm
Depth	111.3 mm (incl. DIN rail 7.5 mm)

Color	light grey RAL 7035
Material	PA 6
		PA 6
		PA 6
		PC
Flammability rating according to UL 94	V-0

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-30 °C ... 65 °C
Ambient temperature (storage/transport)	-40 °C ... 70 °C
Altitude	≤ 4000 m (amsl)
Humidity test	96 h, 95 % RH, 40 °C
Shock (operation)	30g (11 ms period, half-sine shock pulse, according to IEC 60068-2-27)
Shock (operation)		25g (6 ms duration, half-sine shock pulse in accordance with IEC 60068-2-27, continuous shock)
Vibration (operation)	5g (10 ... 150 Hz / 10 cycles / axis / X, Y, Z)

UL approval
Identification	UL/C-UL Listed UL 508
		UL 121201 Class I, Division 2, Groups A, B, C, D, T4A
ATEX
Identification	TÜV 22 ATEX 8874 X
		II 3G Ex ec IIC T4 Gc
IECEx
Identification	IECEx TUR 22.0049X
		II 3G Ex ec IIC T4 Gc
UKCA Ex (UKEX)
Identification	TÜV 22 UKEX 7109 X
		II 3G Ex ec IIC T4 Gc

Standards/specifications	EN 61000-6-2
Standards/specifications	EN 61000-6-3
Standards/specifications	EN 60068-2-78
Standards/specifications	EN 50178
Standards/specifications	EN 60068-2-27
Standards/specifications	IEC 60079-7
Standards/specifications	IEC 60079-0