CAPAROC PM PN - Power module Phoenix Contact

Mã sản phẩm: 1110986

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

Power module with PROFINET interface for supplying the CAPAROC circuit breaker system with 12 or 24 V DC. Additional system interface for communication with the power supply. For DIN rail installation via the CAPAROC current rails.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General
Note	LABS release – in accordance with test specification VW PV 3.10.7:2005-0
		When connecting the conductor, make sure that the CAPAROC modules are not pulled apart due to tensile force. Gaps must not be created between the modules.

Product type	Device circuit breakers
Product family	CAPAROC
Number of slots	4
Insulation characteristics
Protection class	III
Pollution degree	2

PROFINET
Device function	PROFINET device
Specification	PROFINET-IO RT/IRT, Spec. 2.x
Conformance Class	Conformance-Class C
Redundancy	MRP (Media Redundancy Protocol)

General
Operating voltage	10 V DC ... 30 V DC
Rated voltage	12 V DC
Rated voltage		24 V DC
Rated current I_N	45 A DC (Total current input)
Rated surge voltage	0.5 kV
Tripping method	E (electronic)
Feedback resistance	max. 35 V DC
Dielectric strength	35 V DC (Load circuit)
Efficiency	> 99 %
Closed circuit current I₀	typ. 85 mA (no load at 24 V)
Power dissipation	typ. 2 W (no load at 24 V)
Power dissipation		< 3.6 W (at 40 A)
Temperature derating	45 A (Total current at 35°C)
		40 A (Total current at 40°C)
		15 A (Total current at 50°C)
MTBF (IEC 61709, SN 29500)	3985174.15 h (at 25 °C with 21 % load)
		1760834.9 h (at 40°C with 34.25% load)
		601892.76 h (at 35 °C with 100 % load)
Voltage drop	0.048 V (at 40 A)

Main circuit IN+
Connection method	Push-in connection
Stripping length	18 mm
Conductor cross section AWG	20 ... 8
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.5 mm² ... 16 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	0.5 mm² ... 16 mm²
Main circuit IN-
Connection method	Push-in connection
Stripping length	18 mm
Conductor cross section AWG	20 ... 8
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.5 mm² ... 16 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	0.5 mm² ... 16 mm²
System communication
Connection method	Push-in connection
Stripping length	8 mm
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.2 mm² ... 0.75 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	0.2 mm² ... 1.5 mm²

PROFINET
Maximum system extension	≤ 16 (Modules)
Interface type	Ethernet
Number	2
Transmission speed	100 Mbps (acc. to PROFINET standard)
Transmission physics	Ethernet in RJ45 twisted pair
Protocols supported	PROFINET

Connection X1 LED green	lit (connect)
Connection X1 LED yellow	lit (traffic)
Connection X2 LED green	lit (connect)
Connection X2 LED yellow	lit (traffic)
PROFINET bus fault (BF) LED red	lit (connection status not available)
		flashing (сonnection status OK, no communication connection to PROFINET controller)
		off (active communication connection to PROFINET controller)
PROFINET group error (SF) LED red	lit (PROFINET error)
PROFINET group error (SF) LED red		off (no PROFINET error)
PROFINET ready (RDY) LED green	lit (correct operation)
		flashing (waiting for application startup)
		off (operation not correct)
Power (PWR) LED green	lit (Supply voltage)
Power (PWR) LED red	lit (Supply voltage outside the nominal range)

Dimensional drawing
Width	24.8 mm
Height	132.4 mm
Depth	111.3 mm (incl. DIN rail 7.5 mm)

Color	light grey RAL 7035
Material	PA 6
		PA 6
		PA 6
		PC
Flammability rating according to UL 94	V-0

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-30 °C ... 50 °C
Ambient temperature (storage/transport)	-40 °C ... 70 °C
Altitude	≤ 4000 m (amsl)
Humidity test	96 h, 95 % RH, 40 °C
Shock (operation)	30g (11 ms period, half-sine shock pulse, according to IEC 60068-2-27)
Shock (operation)		25g (6 ms duration, half-sine shock pulse in accordance with IEC 60068-2-27, continuous shock)
Vibration (operation)	5g (10 ... 150 Hz / 10 cycles / axis / X, Y, Z)

UL approval
Identification	UL/C-UL Listed UL 508
		UL 121201 Class I, Division 2, Groups A, B, C, D, T4A

Standards/specifications	EN 61000-6-2
Standards/specifications	EN 61000-6-3
Standards/specifications	EN 60068-2-78
Standards/specifications	EN 50178
Standards/specifications	EN 60068-2-6
Standards/specifications	EN 60068-2-27