CAPAROC PM IOL - Power module Phoenix Contact

Mã sản phẩm: 1115670

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

Power module with IO-Link interface for supplying the CAPAROC circuit breaker system with 12 or 24 V DC for up to 20 channels. For DIN rail installation via the CAPAROC current rails.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Device circuit breakers
Product family	CAPAROC
Number of slots	2
Insulation characteristics
Protection class	III
Pollution degree	2

General
Operating voltage	10 V DC ... 30 V DC
Rated voltage	12 V DC
Rated voltage		24 V DC
Rated current I_N	45 A DC (Total current input)
Tripping method	E (electronic)
Feedback resistance	max. 35 V DC
Dielectric strength	35 V DC (Load circuit)
Efficiency	> 99 %
Closed circuit current I₀	typ. 12 mA (no load at 24 V)
Power dissipation	typ. 0.27 W (no load at 24 V)
Power dissipation		< 1.5 W (in nominal operation at 24 V and 45 A)
Temperature derating	45 A (Total current at 40°C)
Temperature derating		30 A (Total current at 65 °C)
MTBF (IEC 61709, SN 29500)	13826266.85 h (at 25 °C with 21 % load)
		5534344.72 h (at 40°C with 34.25% load)
		687502.35 h (at 65°C with 100% load)
Voltage drop	5 mV (at 10 A)
Reset
Current consumption	typ. 0.5 mA (at 24 V DC)
Pulse length	≥ 50 ms

Main circuit IN+
Connection method	Push-in connection
Stripping length	18 mm
Conductor cross section rigid	0.5 mm² ... 16 mm²
Conductor cross section AWG	20 ... 8
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.5 mm² ... 16 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	0.5 mm² ... 16 mm²
Main circuit IN-
Connection method	Push-in connection
Stripping length	18 mm
Conductor cross section rigid	0.5 mm² ... 16 mm²
Conductor cross section AWG	20 ... 8
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.5 mm² ... 16 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	0.5 mm² ... 16 mm²
IO-Link
Connection method	Push-in connection
Stripping length	8 mm
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.2 mm² ... 0.75 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	0.2 mm² ... 1.5 mm²

IO-Link
Interface type	IO-Link
Specification	V1.1
Reverse polarity protection	yes
Transmission speed	230.4 kbps (COM3)
Cycle Time	min. 20 ms
Amount of process data	8 Byte (Input data)
Amount of process data		3 Byte (Output data)
Nominal voltage for I/O supply	24 V DC
Current consumption	typ. 30 mA (IO-Link L+)
IO-Link Vendor ID	176_dec, 00 B0_hex

IO-Link LED off	off (No communication)
IO-Link LED green	flashing (IO-Link connection exists)
Power (PWR) LED green	lit (Supply voltage OK)
Power (PWR) LED red	lit (Supply voltage outside the nominal range)
Power (PWR) LED red		flashing (System topology changed)

Dimensional drawing
Width	12.4 mm
Height	132.4 mm
Depth	111.3 mm (incl. DIN rail 7.5 mm)

Color	light grey RAL 7035
Material	PA 6
		PA 6
		PA 6
		PC
Flammability rating according to UL 94	V-0

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-30 °C ... 65 °C
Ambient temperature (storage/transport)	-40 °C ... 70 °C
Altitude	≤ 4000 m (amsl)
Humidity test	96 h, 95 % RH, 40 °C
Shock (operation)	30g (11 ms period, half-sine shock pulse, according to IEC 60068-2-27)
Shock (operation)		25g (6 ms duration, half-sine shock pulse in accordance with IEC 60068-2-27, continuous shock)
Vibration (operation)	5g (10 ... 150 Hz / 10 cycles / axis / X, Y, Z)