CAPAROC E1 12-24DC/1A - Electronic circuit breaker Phoenix Contact

Mã sản phẩm: 1157288

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

1-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. With fixed nominal current. For DIN rail installation via the CAPAROC current rails.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General
Note	LABS release – in accordance with test specification VW PV 3.10.7:2005-0

Product type	Device circuit breakers
Product family	CAPAROC
Number of positions	1
No. of channels	1
Number of slots	1
Insulation characteristics
Protection class	III
Pollution degree	2

No. of channels	1
General
Operating voltage	10 V DC ... 30 V DC
Rated voltage	12 V DC
Rated voltage		24 V DC
Rated current I_N	1 A DC
Rated current (pre-adjusted)	1 A
Rated surge voltage	0.5 kV
Tripping method	E (electronic)
Required backup fuse	Only required if I_max of the power supply > the short-circuit switching capacity. Integrated failsafe element.
Short-circuit switching capacity	300 A
Dielectric strength	35 V DC (Load circuit)
Fuse	electronic
Efficiency	> 99 %
Closed circuit current I₀	typ. 8.5 mA (no load at 24 V)
Power dissipation	typ. 0.2 W (no load at 24 V)
Power dissipation		< 0.24 W (in nominal operation at 24 V and 1 A)
Measuring tolerance I	± 15 % (typ.)
MTBF (IEC 61709, SN 29500)	21274544 h (at 25 °C with 21 % load)
		9809987 h (at 40°C with 34.25% load)
		1482752 h (at 40°C with 100% load)
Voltage drop	0.02 V (at 1 A)
Fail-safe element	5 A DC (per output channel)
Load circuit
Shutdown time	4 s (with overload 1.1…1.5 x I_N)
		1 s (with overload 1.5…2.0 x I_N)
		0.1 s (with overload 2.0…3.0 x I_N)
		typ. 10 ms (For short circuit > 3.0 x I_N)
Undervoltage switch-off	≤ 8.5 V DC (active)
Undervoltage switch-off		≥ 9.2 V DC (inactive)
Overvoltage switch-off	≥ 32.5 V DC (active)
Overvoltage switch-off		≤ 30.5 V DC (inactive)
Max. capacitive load	≤ 20000 µF (Depending on the current setting and the short-circuit current available)

Fuse-protected output
Connection method	Push-in connection
Stripping length	10 mm
Conductor cross section flexible	0.2 mm² ... 4 mm²
Conductor cross section rigid	0.2 mm² ... 4 mm²
Conductor cross section AWG	24 ... 12
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.25 mm² ... 4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	0.25 mm² ... 4 mm²

Channel LED off	off (Channel switched off)
Channel LED yellow	lit (Channel switched on, channel load > 80% )
		flashing (Programming mode active)
		two flashes (Check the installation, no communication to power module)
Channel LED green	lit (Channel switched on)
Channel LED red	lit (Channel switched off, over- or undervoltage active)
		ON temporarily (Channel switched off, 5 s cool-down phase, overload or short-circuit release)
		flashing (Channel switched off, ready to be switched back on, overload or short-circuit release)

Dimensional drawing
Width	6.2 mm
Height	132.4 mm
Depth	111.3 mm (incl. DIN rail 7.5 mm)

Color	light grey RAL 7035
Material	PA 6
		PA 6
		PA 6
		PC
Flammability rating according to UL 94	V-0

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-30 °C ... 65 °C (The temperature range of the power module must be taken into consideration)
Ambient temperature (storage/transport)	-40 °C ... 70 °C
Altitude	≤ 4000 m (amsl)
Humidity test	96 h, 95 % RH, 40 °C
Shock (operation)	30g (11 ms period, half-sine shock pulse, according to IEC 60068-2-27)
		25g (6 ms duration, half-sine shock pulse in accordance with IEC 60068-2-27, continuous shock)
		15g (6 ms duration, half-sine shock pulse in accordance with IEC 60068-2-27, continuous shock. If more than six CAPAROC E1 modules are used in the system.)
Vibration (operation)	5g (10 ... 150 Hz / 10 cycles / axis / X, Y, Z)

UL approval
Identification	UL/C-UL Listed UL 508
		UL Recognized UL 2367
		UL 121201 Class I, Division 2, Groups A, B, C, D, T4A
		NEC Class 2 according to UL 1310

Standards/specifications	EN 61000-6-2
Standards/specifications	EN 61000-6-3
Standards/specifications	EN 60068-2-78
Standards/specifications	EN 50178
Standards/specifications	EN 60068-2-6
Standards/specifications	EN 60068-2-27