Cảm biến nhiệt độ IFM TAD091

Mã sản phẩm: TAD091

Thương hiệu	IFM
Thời gian bảo hành	5 Năm
Điện áp ngõ vào	24V

Liên hệ mua hàng

Hãng sản xuất: IFM

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product characteristics

Number of inputs and outputs

Number of digital outputs: 1; Number of analogue outputs: 1

Measuring range

-25…160 °C

-13…320 °F

Process connection

threaded connection G 1/2 external thread

Installation length EL [mm]

Application

Special feature

Gold-plated contacts

Measuring element

1 x Pt 1000 + 1 x NTC; (thermically coupled, with backup function (temperature measuring even if one element fails))

Media

liquids and gases

Pressure rating [bar]

Minimum installation depth [mm]

MAWP (for applications according to CRN) [bar]

Electrical data

Operating voltage [V]

18…32 DC; (“supply class 2” to cULus)

Current consumption [mA]

6; (24 V)

Protection class

III

Reverse polarity protection

yes

Power-on delay time [s]

Integrated watchdog

yes

Inputs / outputs

Number of inputs and outputs

Number of digital outputs: 1; Number of analogue outputs: 1

Outputs

Total number of outputs

Output signal

switching signal; analogue signal; IO-Link; (configurable)

Electrical design

PNP/NPN

Number of digital outputs

Output function

normally open / normally closed / diagnostic signal; (parameterisable)

Max. voltage drop switching output DC [V]

Permanent current rating of switching output DC [mA]

150; (200 (…60°C); 250 (…40 °C))

Diagnostic output

diagnostic output for drift and fault monitoring

Number of analogue outputs

Analogue current output [mA]

4…20

Max. load [Ω]

(Ub – 15 V) x 50

Short-circuit protection

yes

Type of short-circuit protection

pulsed

Overload protection

yes

Measuring/setting range

Measuring range

-25…160 °C

-13…320 °F

Note on measuring range

scalable

Factory setting

0…150 °C / 32…302 °F

Drift warning

0.2…5 °C

0.4…9 °F

Drift alarm

0.2…5 °C

0.4…9 °F

In steps of

0.05 °C

0.1 °F

Resolution

Resolution of analogue output [K]

0.05

Accuracy / deviations

Precision analogue output [K]

± 0,2 (-10…130°C); ± 0,3 (130…140°C); ± 0,3 ± 0,1% MS (-25…-10/140…160°C); (probe completely inserted into the measured medium up to the sealing chamfer)

Temperature coefficient [% of the span / 10 K]

< ± 0,01; (in case of deviation from the reference condition 25 ± 5 °C)

Response times

Dynamic response T05 / T09 [s]

3 / 6

Software / programming

Parameter setting options

drift warning/drift alarm threshold; Fail-Safe; Display unit; scaling of the analogue output; redundancy switching; performance diagnostic output; switching logic; normally open / normally closed

Interfaces

Communication interface

IO-Link

Transmission type

COM1 (4,8 kBaud)

IO-Link revision

1.1

SDCI standard

IEC 61131-9 CDV

Profiles

Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis

SIO mode

yes

Required master port type

Process data analogue

Process data binary

Min. process cycle time [ms]

18.8

Supported DeviceIDs

Type of operation	DeviceID
Default	323

Operating conditions

Ambient temperature [°C]

-25…70

Storage temperature [°C]

-40…85

Protection

IP 68; IP 69K

Mechanical data

Weight [g]

335.5

Materials

stainless steel (1.4435 / 316L); stainless steel (1.4404 / 316L); PEI; FKM

Materials (wetted parts)

stainless steel (1.4435 / 316L); stainless steel (1.4404 / 316L)

Tightening torque [Nm]

30…50

Process connection

threaded connection G 1/2 external thread

Surface characteristics Ra/Rz of the wetted parts

Ra: < 0.6

Installation length EL [mm]

Remarks

Remarks

MS = set measuring span

Pack quantity

1 pcs.

Electrical connection

Connection

Connector: 1 x M12; Contacts: gold-plated

Xuất xứ: