Biến tần Yaskawa P1000 Drive

Mã sản phẩm: P1000

Danh mục: Biến Tần, Biến tần YASKAWA,

Liên hệ mua hàng

Hãng sản xuất: YASKAWA

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

P1000 Drive 3/4 – 1000 HP

The P1000 drive provides simple, reliable, cost-effective control for variable-torque loads through 1000 HP. Specific application features, energy savings, and network connectivity make the P1000 a great choice for industrial fans and pumps.

P1000 Drive Features

LCD Operator with Real Time Clock

5-line, 16-character alpha-numeric display with time and date stamping for events, along with timer controls for starting, stopping, and speed changes without the need for external controls.

Application Macros

Choose from pre-configured fan and pump setup macros to match the application for quick and easy set up.

Selectable and Custom Engineering Units

Allows for easy configuration of keypad display to match process and feedback devices such as PSI, GPM, Feet.

Underload Detection

Monitors load and will shut system down in the event of a fan belt or pump shaft breakdown.

Parameter Storage and Removable Terminal Board

Allows for easy replacement of control card without removing control wires, and stores all drive settings without the need for a copy device.

PI Process Control

Maintains a set point for closed loop control of fans and pumps for pressure, flow, or temperature regulation, and eliminates the need for a closed loop output signal from a process controller. Independent PI to control an external device in the system.

Power Quality

Built-in DC reactors (30 HP and larger) provide input harmonics benefit, and protection from input disturbances. Integrated 12 Pulse version (480V, 40 HP and larger) provides a cost-effective solution for low harmonics.

Dynamic Noise Control

Monitors the load at all times and reduces the output voltage automatically, reducing motor audible noise.

Networking Options

Industrial Communication
- Modbus RTU (built-in)
- DeviceNet
- EtherNet/IP
- Modbus TCP/IP
- PROFIBUS-DP
- PROFINET
Building Automation Networks (BAS)
- BACnet
- Lonworks
- Metasys (N2)
- Apogee (P1

P1000 Drive Specifications

ITEM	SPECIFICATION
Continuous Load Capacity	Variable Torque (square of percent speed)
Intermittent Load Capacity	120% for 60 seconds
Output Frequency	0.01 to 400 Hz
Enclosure Solutions	Open Type/IP00 NEMA Type 1(kit required for some models) IFlange Type (front = Open/IP00, back = NEMA Type 12)
Power Solutions	6-pulse (standard) 240V: 3/4 to 175 HP 480V: 1 to 1000 HP 600V: 1 to 250 HP12-pulse (low harmonic) 480V: 40 to 1000 HP
Ambient Operating Temperature	-10°C to 40°C (14°F to 104°F)
Global Certification	UL, CSA, CE, RoHS, C-Tick
Standard I/O	(8) multi-function digital inputs (24Vdc) (3) multi-function analog inputs (0-10 VDC, 4-20 mA) (1) multi-function pulse input (1) fault relay output (form C) (1) multi-function relay (form C) (2) multi-function relay outputs (form A) (2) multi-function analog outputs (0 +/- 10 VDC, 4-20mA) Sensor feedback power supply (+24VVdc at 150mA supply) 120V converter for 8 standard digital inputs (option)

P1000 Drive Models & Ratings

P1000 Drive 200-240V, 3-Phase, Standard

DRIVE MODEL NUMBER	RATED OUTPUT CURRENT (AMPS)	NOMINAL HP ³	STANDARD ENCLOSURE^{1, 2}
CIMR-PU2A0004FAA	3.5	3/4	NEMA 1
CIMR-PU2A0006FAA	6	1
CIMR-PU2A0008FAA	8	2
CIMR-PU2A0010FAA	9.6	2	NEMA 1
CIMR-PU2A0012FAA	12	3
CIMR-PU2A0018FAA	17.5	5
CIMR-PU2A0021FAA	21	7.5	NEMA 1
CIMR-PU2A0030FAA	30	10
CIMR-PU2A0040FAA	40	15
CIMR-PU2A0056FAA	56	20	NEMA 1
CIMR-PU2A0069FAA	69	25
CIMR-PU2A0081FAA	81	30
CIMR-PU2A0110FAA	110	40	NEMA 1
CIMR-PU2A0138FAA	138	50	NEMA 1
CIMR-PU2A0169FAA	169	60	NEMA 1
CIMR-PU2A0211FAA	211	75	NEMA 1
CIMR-PU2A0250AAA	250	100	Protected Chassis
CIMR-PU2A0312AAA	312	125	Protected Chassis
CIMR-PU2A0360AAA	360	150	Protected Chassis
CIMR-PU2A0415AAA	415	175	Protected Chassis

Standard Enclosure can be conventionally mounted, or heatsink external (kit required for models CIMR-PU2A081FAA and smaller).
Only models ending in FAA (CIMR-PU2A0211FAA and smaller) come standard with NEMA 1 End Cap Kits. Separately sold kits are available for larger models.
Horsepower rating is based on standard NEMA B 4-pole motor design as represented in NEC table 430.150 Full-Load Current, Three-Phase Alternating Current Motors. Also, listed power ratings assumes three-phase input. For single-phase input applications, consult Manual Supplement TOEPYEASUP03 for proper sizing.

P1000 Drive 200-240V, 1-Phase, Standard

DRIVE MODEL NUMBER ^{1, 2}	SINGLE PHASE INPUT – SIZING METHOD A^A (CONTINUOUS FULL POWER)				SINGLE PHASE INPUT – SIZING METHOD B^B (86% MAX POWER OF CONNECTED MOTOR SIZE)
	WITHOUT ADDITIONAL REACTOR		WITH ADDITIONAL REACTOR		MOTOR AMPS	MOTOR SIZE (HP)
	MOTOR AMPS	MOTOR SIZE (HP)	MOTOR AMPS	MOTOR SIZE (HP)	MOTOR AMPS	MOTOR SIZE (HP)
CIMR-PU2A0004FAA	1.7	1/3	2.4	1/2	3.5	1/2
CIMR-PU2A0006FAA	3.5	3/4	3.5	3/4	4.6	1
CIMR-PU2A0008FAA	4.6	1	4.6	1	6.6	1
CIMR-PU2A0010FAA	4.6	1	4.6	1	6.6	1.5
CIMR-PU2A0012FAA	6.6	1.5	7.5	2	7.5	2
CIMR-PU2A0018FAA	7.5	2	10.6	3	10.6	3
CIMR-PU2A0021FAA	7.5	2	10.6	3	10.6	3
CIMR-PU2A0030FAA	10.6	3	10.6	3	17	5
CIMR-PU2A0040FAA	10.6	3	17	5	17	5
CIMR-PU2A0056FAA	17	5	24	7.5	24	7.5
CIMR-PU2A0069FAA	24	7.5	31	10	31	10
CIMR-PU2A0081FAA	31	10	46	15	46	15
CIMR-PU2A0110FAA	31	10	31	10	46	15
CIMR-PU2A0138FAA	46	15	46	15	59	20
CIMR-PU2A0169FAA	59	20	59	20	75	25
CIMR-PU2A0211FAA	75	25	75	25	88	30
CIMR-PU2A0250AAA	88	30	88	30	114	40
CIMR-PU2A0312AAA	114	40	114	40	143	50
CIMR-PU2A0360AAA	143	50	143	50	169	60
CIMR-PU2A0415AAA	169	60	169	60	211	75

Standard Enclosure can be conventionally mounted, or heatsink external (kit required for models CIMR-PU2A0081FAA and smaller). Flange Enclosure includes special factory-installed gasketing and flange to provide NEMA 12 backside integrity when mounting heatsink external.
Only models ending in FAA (CIMR-PU2A0211FAA and smaller) come standard with NEMA 1 End Cap Kits. Separately sold kits are available for larger models.
For Flange Drives, use the Sizing Method above to determine proper drive size. Use selected model number with “UAA” suffix instead of “FAA” or “AAA” suffix.

(A) Use single-phase input sizing method A for applications requiring more than 86% motor power. When sizing with additional reactor, refer to “Reactors for Single Phase Input” under P1000 Power Options on this site. Caution: Adding more impedance than specified will degrade performance.
(B) Use single-phase input sizing method B for applications requiring a maximum of 86% motor power.

P1000 Drive 200-240V, 3-Phase, Flange

DRIVE MODEL NUMBER ¹	RATED OUTPUT CURRENT (AMPS)	NOMINAL HP ²	ENCLOSURE ¹
CIMR-PU2A0004UAA	3.5	3/4	Flange
CIMR-PU2A0006UAA	6	1
CIMR-PU2A0008UAA	8	2
CIMR-PU2A0010UAA	9.6	3	Flange
CIMR-PU2A0012UAA	12	3
CIMR-PU2A0018UAA	17.5	5
CIMR-PU2A0021UAA	21	7.5	Flange
CIMR-PU2A0030UAA	30	10
CIMR-PU2A0040UAA	40	15
CIMR-PU2A0056UAA	56	20	Flange
CIMR-PU2A0069UAA	69	25
CIMR-PU2A0081UAA	81	30
CIMR-PU2A0110UAA	110	40	Flange
CIMR-PU2A0138UAA	138	50
CIMR-PU2A0169UAA	169	60
CIMR-PU2A0211UAA	211	75	Flange
CIMR-PU2A0250UAA	250	100
CIMR-PU2A0312UAA	312	125
CIMR-PU2A0360UAA	360	150	Flange
CIMR-PU2A0415UAA	415	175	Flange

Flange Enclosure includes special factory-installed gasketing and flange to provide NEMA 12 backside integrity when mounting heatsink external.
Horsepower rating is based on standard NEMA B 4-pole motor design as represented in NEC table 430.150 Full-Load Current, Three-Phase Alternating Current Motors. Also, listed power ratings assumes three-phase input. For single-phase input applications, consult Manual Supplement TOEPYEASUP03 for proper sizing.

P1000 Drive 380-480V, 3-Phase, Standard

DRIVE MODEL NUMBER	RATED OUTPUT CURRENT (AMPS)	NOMINAL HP ³	STANDARD ENCLOSURE ^{1, 2}
CIMR-PU4A0002FAA	2.1	1	NEMA 1
CIMR-PU4A0004FAA	4.1	2
CIMR-PU4A0005FAA	5.4	3
CIMR-PU4A0007FAA	6.9	4	NEMA 1
CIMR-PU4A0009FAA	8.8	5
CIMR-PU4A0011FAA	11.1	7.5
CIMR-PU4A0018FAA	17.5	10	NEMA 1
CIMR-PU4A0023FAA	23	15
CIMR-PU4A0031FAA	31	20
CIMR-PU4A0038FAA	38	25	NEMA 1
CIMR-PU4A0044FAA	44	30
CIMR-PU4A0058FAA	58	40
CIMR-PU4A0072FAA	72	50	NEMA 1
CIMR-PU4A0088FAA	88	60
CIMR-PU4A0103FAA	103	75
CIMR-PU4A0139FAA	139	100	NEMA 1
CIMR-PU4A0165FAA	165	125	NEMA 1
CIMR-PU4A0208AAA	208	150	Protected Chassis
CIMR-PU4A0250AAA	250	200
CIMR-PU4A0296AAA	296	250
CIMR-PU4A0362AAA	362	300	Protected Chassis
CIMR-PU4A0414AAA	414	350	Protected Chassis
CIMR-PU4A0515AAA	515	400	Protected Chassis
CIMR-PU4A0675AAA	675	500	Protected Chassis
CIMR-PU4A0930AAA	930	700-800	Protected Chassis
CIMR-PU4A1200AAA	1200	900-1000	Protected Chassis

Standard Enclosure can be conventionally mounted, or heatsink external (kit required for models CIMR-PU4A044FAA and smaller).
Only models ending in FAA (CIMR-PU4A0165FAA and smaller) come standard with NEMA 1 End Cap Kits. Separately sold kits are available for larger models.
Horsepower rating is based on standard NEMA B 4-pole motor design as represented in NEC table 430.150 Full-Load Current, Three-Phase Alternating Current Motors. Also, listed power ratings assumes three-phase input. For single-phase input applications, consult Manual Supplement TOEPYEASUP03 for proper sizing.
Models CIMR-PU4A0930AAA and CIMR-PU4A1200AAA must be used with semiconductor input fuses and must be fed by a power source that has ground fault protection. A supplementary ground fault protection device can be added between the drive and the power source to address this requirement.

P1000 Drive 380-480V, 1-Phase, Standard

DRIVE MODEL NUMBER ^{1, 2}	SINGLE PHASE INPUT – SIZING METHOD A^A (CONTINUOUS FULL POWER)				SINGLE PHASE INPUT – SIZING METHOD B^B (86% MAX POWER OF CONNECTED MOTOR SIZE)
	WITHOUT ADDITIONAL REACTOR		WITH ADDITIONAL REACTOR		MOTOR AMPS	MOTOR SIZE (HP)
	MOTOR AMPS	MOTOR SIZE (HP)	MOTOR AMPS	MOTOR SIZE (HP)	MOTOR AMPS	MOTOR SIZE (HP)
CIMR-PU4A0002FAA	0.8	1/3	1.1	1/2	1.6	3/4
CIMR-PU4A0004FAA	1.6	3/4	2.1	1	2.1	1
CIMR-PU4A0005FAA	2.1	1	3	1.5	3.4	2
CIMR-PU4A0007FAA	3.0	1.5	3.4	2	3.4	2
CIMR-PU4A0009FAA	3.4	2	4.8	3	4.8	3
CIMR-PU4A0011FAA	3.4	2	4.8	3	4.8	3
CIMR-PU4A0018FAA	4.8	3	4.8	3	7.6	5
CIMR-PU4A0023FAA	4.8	3	7.6	5	7.6	5
CIMR-PU4A0031FAA	11	7.5	11	7.5	14	10
CIMR-PU4A0038FAA	11	7.5	14	10	14	10
CIMR-PU4A0044FAA	14	10	14	10	21	15
CIMR-PU4A0058FAA	21	15	21	15	27	20
CIMR-PU4A0072FAA	27	20	27	20	34	25
CIMR-PU4A0088FAA	27	20	27	20	34	25
CIMR-PU4A0103FAA	27	20	27	20	34	25
CIMR-PU4A0139FAA	52	40	52	40	65	50
CIMR-PU4A0165FAA	52	40	52	40	65	50
CIMR-PU4A0208AAA	65	50	65	50	77	60
CIMR-PU4A0250AAA	77	60	77	60	96	75
CIMR-PU4A0296AAA	96	75	96	75	124	100
CIMR-PU4A0362AAA	124	100	124	100	156	125
CIMR-PU4A0414AAA	156	125	156	125	180	150
CIMR-PU4A0515AAA	156	125	156	125	180	150
CIMR-PU4A0675AAA	180	150	180	150	240	200

Standard Enclosure can be conventionally mounted, or heatsink external (kit required for models CIMR-PU4A0044FAA and smaller). Flange Enclosure includes special factory-installed gasketing and flange to provide NEMA 12 backside integrity when mounting heatsink external.
Only models ending in FAA (CIMR-PU4A0165FAA and smaller) come standard with NEMA 1 End Cap Kits. Separately sold kits are available for larger models.
For Flange Drives, use the Sizing Method above to determine proper drive size. Use selected model number with “UAA” suffix instead of “FAA” or “AAA” suffix.

P1000 Drive 380-480V, 3-Phase, Flange

DRIVE MODEL NUMBER¹	RATED OUTPUT CURRENT (AMPS)	NOMINAL HP²	ENCLOSURE¹
CIMR-PU4A0002UAA	2.1	1	Flange
CIMR-PU4A0004UAA	4.1	2
CIMR-PU4A0005UAA	5.4	3
CIMR-PU4A0007UAA	6.9	4	Flange
CIMR-PU4A0009UAA	8.8	5
CIMR-PU4A0011UAA	11.1	7.5
CIMR-PU4A0018UAA	17.5	10	Flange
CIMR-PU4A0023UAA	23	15
CIMR-PU4A0031UAA	31	20
CIMR-PU4A0038UAA	38	25	Flange
CIMR-PU4A0044UAA	44	30
CIMR-PU4A0058UAA	58	40
CIMR-PU4A0072UAA	72	50	Flange
CIMR-PU4A0088UAA	88	60
CIMR-PU4A0103UAA	103	75
CIMR-PU4A0139UAA	139	100	Flange
CIMR-PU4A0165UAA	165	125	Flange
CIMR-PU4A0208UAA	208	150	Flange
CIMR-PU4A0250UAA	250	200
CIMR-PU4A0296UAA	296	250
CIMR-PU4A0362UAA	362	300	Flange
CIMR-PU4A0414UAA	414	350	Flange
CIMR-PU4A0515UAA	515	400	Flange
CIMR-PU4A0675UAA	675	500	Flange
CIMR-PU4A0930UAA³	930	700-800	Flange
CIMR-PU4A1200UAA³	1200	900-1000	Flange

Flange Enclosure includes special factory-installed gasketing and flange to provide NEMA 12 backside integrity when mounting heatsink external.
Horsepower rating is based on standard NEMA B 4-pole motor design as represented in NEC table 430.150 Full-Load Current, Three-Phase Alternating Current Motors. Also, listed power ratings assumes three-phase input. For single-phase input applications, consult Manual Supplement TOEPYEASUP03 for proper sizing.
Models CIMR-PU4A0930UAA and CIMR-PU4A1200UAA must be used with semiconductor input fuses and must be fed by a power source that has ground fault protection. A supplementary ground fault protection device can be added between the drive and the power source to address this requirement.

P1000 Drive 380-480V, 3-Phase, 12-Pulse Flange

DRIVE MODEL NUMBER 12-PULSE¹	RATED OUTPUT CURRENT (AMPS)	NOMINAL HP²	ENCLOSURE¹
CIMR-PU4T0058UAA	58	40	Flange
CIMR-PU4T0072UAA	72	50	Flange
CIMR-PU4T0088UAA	88	60	Flange
CIMR-PU4T0103UAA	103	75	Flange
CIMR-PU4T0139UAA	139	100	Flange
CIMR-PU4T0165UAA	165	125	Flange
CIMR-PU4T0208UAA	208	150	Flange
CIMR-PU4T0250UAA	250	200
CIMR-PU4T0296UAA	296	250
CIMR-PU4T0362UAA	362	300	Flange
CIMR-PU4T0414UAA	414	350	Flange
CIMR-PU4T0515UAA	515	400	Flange
CIMR-PU4T0675UAA	675	500	Flange
See note 3	930	700-800	Flange
See note 3	1200	900-1000	Flange

Flange Enclosure includes special factory-installed gasketing and flange to provide NEMA 12 backside integrity when mounting heatsink external. Flange parts can be removed if convential mounting is desired.
Horsepower rating is based on standard NEMA B 4-pole motor design as represented in NEC table 430.150 Full-Load Current, Three-Phase Alternating Current Motors.
Models CIMR-PU4A0930xxx and CIMR-PU4A1200xxx are user configurable for either 6-Pulse (3-Phase) or 12-Pulse (6-Phase) input. See Standard 480V for model numbers.

P1000 Drive 500-600V, 3-Phase, Standard

DRIVE MODEL NUMBER	RATED OUTPUT CURRENT (AMPS)	NOMINAL HP ³	STANDARD ENCLOSURE ^{1, 2}
CIMR-PU5A0003FAA	2.7	1 & 2	NEMA 1
CIMR-PU5A0004FAA	3.9	3
CIMR-PU5A0006FAA	6.1	5
CIMR-PU5A0009FAA	9	7.5	NEMA 1
CIMR-PU5A0011FAA	11	10
CIMR-PU5A0017FAA	17.5	15
CIMR-PU5A0022FAA	22	20	NEMA 1
CIMR-PU5A0027FAA	27	25
CIMR-PU5A0032FAA	32	30
CIMR-PU5A0041FAA	41	40	NEMA 1
CIMR-PU5A0052FAA	52	50
CIMR-PU5A0062FAA	62	60
CIMR-PU5A0077FAA	77	75	NEMA 1
CIMR-PU5A0099FAA	99	100	NEMA 1
CIMR-PU5A0125AAA	125	125	Protected Chassis
CIMR-PU5A0145AAA	145	150	Protected Chassis
CIMR-PU5A0192AAA	192	200	Protected Chassis
CIMR-PU5A0242AAA	242	250	Protected Chassis

Standard Enclosure can be conventionally mounted, or heatsink external (kit required for models CIMR-PU5A032FAA and smaller).
Only models ending in FAA (CIMR-PU5A0099FAA and smaller) come standard with NEMA 1 End Cap Kits. Separately sold kits are available for larger models.
Horsepower rating is based on standard NEMA B 4-pole motor design as represented in NEC table 430.150 Full-Load Current, Three-Phase Alternating Current Motors. Also, listed power ratings assumes three-phase input. For single-phase input applications, consult Manual Supplement TOEPYEASUP03 for proper sizing.

P1000 Drive 500-600V, 1-Phase, Standard

DRIVE MODEL NUMBER ^{1, 2}	SINGLE PHASE INPUT – SIZING METHOD A^A (CONTINUOUS FULL POWER)				SINGLE PHASE INPUT – SIZING METHOD B^B (86% MAX POWER OF CONNECTED MOTOR SIZE)
	WITHOUT ADDITIONAL REACTOR		WITH ADDITIONAL REACTOR		MOTOR AMPS	MOTOR SIZE (HP)
	MOTOR AMPS	MOTOR SIZE (HP)	MOTOR AMPS	MOTOR SIZE (HP)	MOTOR AMPS	MOTOR SIZE (HP)
CIMR-PU5A0003FAA	1.7	1	2.4	1.5	1.7	1
CIMR-PU5A0004FAA	2.4	1.5	2.7	2	2.7	2
CIMR-PU5A0006FAA	2.7	2	3.9	3	3.9	3
CIMR-PU5A0009FAA	3.9	3	6.1	5	6.1	5
CIMR-PU5A0011FAA	2.7	2	3.9	3	3.9	3
CIMR-PU5A0017FAA	6.1	5	6.1	5	9	7.5
CIMR-PU5A0022FAA	6.1	5	9	7.5	9	7.5
CIMR-PU5A0027FAA	9	7.5	11	10	11	10
CIMR-PU5A0032FAA	9	7.5	11	10	11	10
CIMR-PU5A0041FAA	17	15	17	15	22	20
CIMR-PU5A0052FAA	17	15	17	15	22	20
CIMR-PU5A0062FAA	27	25	27	25	32	30
CIMR-PU5A0077FAA	32	30	32	30	41	40
CIMR-PU5A0099FAA	32	30	32	30	41	40
CIMR-PU5A0125AAA	52	50	52	50	62	60
CIMR-PU5A0145AAA	52	50	52	50	62	60
CIMR-PU5A0192AAA	77	75	77	75	99	100
CIMR-PU5A0242AAA	77	75	77	75	99	100

Standard Enclosure can be conventionally mounted, or heatsink external (kit required for models CIMR-PU5A0032FAA and smaller). Flange Enclosure includes special factory-installed gasketing and flange to provide NEMA 12 backside integrity when mounting heatsink external.
Only models ending in FAA (CIMR-PU5A0099FAA and smaller) come standard with NEMA 1 End Cap Kits. Separately sold kits are available for larger models.
For Flange Drives, use the Sizing Method above to determine proper drive size. Use selected model number with “UAA” suffix instead of “FAA” or “AAA” suffix.(A) Use single-phase input sizing method A for applications requiring more than 86% motor power. When sizing with additional reactor, refer to “Reactors for Single Phase Input” under P1000 Power Options on this site. Caution: Adding more impedance than specified will degrade performance.
(B) Use single-phase input sizing method B for applications requiring a maximum of 86% motor power.

P1000 Drive 500-600V, 3-Phase, Flange

DRIVE MODEL NUMBER¹	RATED OUTPUT CURRENT (AMPS)	NOMINAL HP²	ENCLOSURE¹
CIMR-PU5A0003UAA	2.7	1 & 2	Flange
CIMR-PU5A0004UAA	3.9	3
CIMR-PU5A0006UAA	6.1	5
CIMR-PU5A0009UAA	9	7.5	Flange
CIMR-PU5A0011UAA	11	10
CIMR-PU5A0017UAA	17.5	15
CIMR-PU5A0022UAA	22	20	Flange
CIMR-PU5A0027UAA	27	25
CIMR-PU5A0032UAA	32	30
CIMR-PU5A0041UAA	41	40	Flange
CIMR-PU5A0052UAA	52	50
CIMR-PU5A0062UAA	62	60
CIMR-PU5A0077UAA	77	75	Flange
CIMR-PU5A0099UAA	99	100	Flange
CIMR-PU5A0125UAA	125	125	Flange
CIMR-PU5A0145UAA	145	150	Flange
CIMR-PU5A0192UAA	192	200	Flange
CIMR-PU5A0242UAA	242	250	Flange

Flange Enclosure includes special factory-installed gasketing and flange to provide NEMA 12 backside integrity when mounting heatsink external. Flange parts can be removed if conventional mounting is desired.
Horsepower rating is based on standard NEMA B 4-pole motor design as represented in NEC table 430.150 Full-Load Current, Three-Phase Alternating Current Motors.
Models CIMR-PU4A0930xxx and CIMR-PU4A1200xxx are user configurable for either 6-Pulse (3-Phase) or 12-Pulse (6-Phase) input. See Standard 480V price page on page 4 for model numbers and prices.