AXL SE RTD4 PT100 - Temperature module Phoenix Contact

Mã sản phẩm: 1088106

Axioline Smart Elements, Temperature recording module, Analog RTD inputs: 4 (Pt 100), connection technology: 3-conductor, degree of protection: IP20

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Color

traffic grey A RAL 7042

Smart Element interface
Number of interfaces	1
Connection method	Card edge connector
Transmission speed	See system in which you use the Smart Element.
Start time until ready to operate	< 1000 ms

Module
ID code (hex)	none
Process data channel	64 bit
Input address area	8 Byte
Output address area	8 Byte
Required parameter data	24 Byte
Required configuration data	6 Byte

Analog
Input name	Analog RTD inputs
Description of the input	Inputs for resistive temperature sensors
Number of inputs	4 (Pt 100)
Connection method	Push-in connection
Connection technology	3-conductor
Note regarding the connection technology	shielded, 2-, 3-, and 4-conductor sensors can be connected
A/D converter resolution	16 bit
Sensor types (RTD) that can be used	Pt 100 (IEC 60751/EN 60751)
Data formats	Standardized representation
Measured value representation	16 bits (15 bits + sign bit)
Nominal value of the current sources	1 mA (pulsed current, the data is valid during the sampling phase)
Process data update	typ. 1 ms
Protective circuit	Overload protection; max. ±40 V DC, 1 min.
Protective circuit		Transient protection

Type	modular
Product type	I/O component
Product family	Axioline Smart Elements
Mounting position	See the system in which the Smart Element is used.
Insulation characteristics
Overvoltage category	II (IEC 60664-1)
Pollution degree	2 (EN 60664-1)

Potentials: Communications power supply of the Smart Elements (U_SE)
Supply voltage	using card edge connectors
Potentials: I/O supply (U_P)
Supply voltage	24 V DC (using card edge connectors)
Supply voltage range	19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw	max. 12 mA
Current draw		typ. 8 mA
Current consumption	min. 5 mA (without connected peripherals)
Power consumption	max. 290 mW
Power consumption		min. 120 mW
Protective circuit	Surge protection; See the system in which the Smart Element is used.
Protective circuit		Reverse polarity protection; Polarity protection diode

Connection technology
Connection name	I/O
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline Smart Elements” user manual.
Conductor connection
Connection method	Push-in connection
Conductor cross section rigid	0.25 mm² ... 1.5 mm²
Conductor cross section flexible	0.25 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Conductor cross section flexible, with ferrule without plastic sleeve	0.25 mm² ... 1.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.25 mm² ... 1.5 mm²
Stripping length	8 mm
I/O
Connection method	Push-in connection
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline Smart Elements” user manual.
Conductor cross section, rigid	0.25 mm² ... 1.5 mm²
Conductor cross section, flexible	0.25 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.25 mm² ... 1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	0.25 mm² ... 1.5 mm²
Stripping length	8 mm

Ambient conditions
Ambient temperature (operation)	-25 °C ... 60 °C
Degree of protection	IP20
Air pressure (operation)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)