AXL SE PSDI8/3 - Safety module Phoenix Contact

Mã sản phẩm: 1079241

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

Axioline Smart Elements, Digital input module, Functional safety, PROFIsafe, only for connection to Phoenix Contact or Siemens controller, Safe digital inputs: 4 (2-channel assignment), 8 (1-channel assignment), 24 V DC, connection technology: 3-conductor, degree of protection: IP20

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Dimensional drawing
Width	14.9 mm
Height	62.2 mm
Depth	62 mm

Smart Element interface
Number of interfaces	1
Connection method	Card edge connector
Transmission speed	See system in which you use the Smart Element.

Module
Input address area	6 Byte (PROFIsafe 2.6.1)
Output address area	5 Byte (PROFIsafe 2.6.1)
Required configuration data	6 Byte

Digital
Input name	Safe digital inputs
Description of the input	EN 61131-2, type 3
Number of inputs	4 (2-channel assignment)
Number of inputs		8 (1-channel assignment)
Cable length	max. 200 m (200 m from the clock output to the safe input (total based on forward and return path))
Connection method	Push-in connection
Connection technology	3-conductor
Input voltage range "0" signal	-3 V DC ... 5 V DC
Input voltage range "1" signal	11 V DC ... 30 V DC
Nominal input voltage U_IN	24 V DC
Nominal input current at U_IN	typ. 2.7 mA
Input filter time	1.5 ms
		3 ms (Default)
		5 ms
		15 ms
Protective circuit	Polarity reversal protection of the inputs; Diode

Type	modular
Product type	I/O component
Product family	Axioline Smart Elements
Mounting position	any
Application	Functional safety
		PROFIsafe
		only for connection to Phoenix Contact or Siemens controller
Operating mode	PROFIsafe 2.4, PROFIsafe 2.6.1
Insulation characteristics
Overvoltage category	II (IEC 60664-1)
Pollution degree	2 (EN 60664-1)

Transmission medium	Copper
Potentials
Protection	external fusing via the system in which the Smart Element is used
Protective circuit	Surge protection of the supply voltage; electronic (35 V, 0.5 s)
Protective circuit		Polarity reversal protection of the supply voltage; via the system in which the Smart Element is used
Potentials: Axioline F local bus supply (U_Bus)
Supply voltage	5 V DC (via bus base module)
Current draw	max. 140 mA (at U_Bus 5 V DC)
Current draw		typ. 101 mA (at U_Bus 5 V DC)
Potentials: Communications power supply of the Smart Elements (U_SE)
Supply voltage	using card edge connectors
Potentials: I/O supply (U_P)
Supply voltage	24 V DC (using card edge connectors)
Supply voltage range	19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw	max. 12 mA (Power supply from U_p with 30 V DC, all inputs set, without power supply to the sensors via clock supplies OUT_T1 and OUT_T2)
Current draw		typ. 9 mA (Power supply from U_p with 24 V DC, all inputs set, without power supply to the sensors via clock supplies OUT_T1 and OUT_T2)
Current consumption	min. 8 mA (Power supply from U_p with 19.2 V DC, all inputs set, without power supply to the sensors via clock supplies OUT_T1 and OUT_T2)
Power consumption	max. 360 mW
Power consumption		min. 154 mW

Connection technology
Connection name	I/O
Note on the connection method	Note the specification in the section Conductor cross sections, and stripping and insertion lengths.
Conductor connection
Connection method	Push-in connection
Conductor cross section rigid	0.25 mm² ... 1.5 mm²
Conductor cross section flexible	0.25 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Stripping length	8 mm
I/O
Connection method	Push-in connection
Note on the connection method	Note the specification in the section Conductor cross sections, and stripping and insertion lengths.
Conductor cross section, rigid	0.25 mm² ... 1.5 mm²
Conductor cross section, flexible	0.25 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Stripping length	8 mm

Ambient conditions
Ambient temperature (operation)	-25 °C ... 60 °C
Degree of protection	IP20
Degree of protection at installation location	min. IP54
Air pressure (operation)	70 kPa ... 108 kPa
Air pressure (storage/transport)	66 kPa ... 108 kPa
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)