AXL SE PD8/8 24V/GND - Potential distributors Phoenix Contact

Mã sản phẩm: 1337225

Axioline Smart Elements, Potential distribution module, 24 V DC, GND, degree of protection: IP20

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Color

traffic grey A RAL 7042

Smart Element interface
Number of interfaces	1
Connection method	Card edge connector
Transmission speed	See system in which you use the Smart Element.

Module
ID code (hex)	none
Process data channel	0 bit
Input address area	0 Byte (All systems except PROFIBUS)
Input address area		1 Byte (PROFIBUS)
Output address area	0 Byte
Required parameter data	1 Byte
Required configuration data	6 Byte

Type	modular
Product type	I/O component
Product family	Axioline Smart Elements
Mounting position	See the system in which the Smart Element is used.
Insulation characteristics
Overvoltage category	II (IEC 60664-1, EN 60664-1)
Pollution degree	2 (IEC 60664-1, EN 60664-1)

Potentials: Communications power supply of the Smart Elements (U_SE)
Supply voltage	using card edge connectors
Potentials: I/O supply (U_P)
Supply voltage	24 V DC (using card edge connectors)
Supply voltage range	19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw	max. 4 A
Current consumption	min. 9 mA (without connected peripherals)
Power consumption	max. 120 W (of which 1.06 W constitute internal losses)
Power consumption		min. 173 mW
Protective circuit	Surge protection; See the system in which the Smart Element is used.
		Reverse polarity protection; Polarity protection diode
		Short-circuit/overload protection; electronic fuse (for terminal points 0 ... 7, 4 A)

Connection technology
Connection name	I/O
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline Smart Elements” user manual.
Conductor connection
Connection method	Push-in connection
Conductor cross section rigid	0.25 mm² ... 1.5 mm²
Conductor cross section flexible	0.25 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Conductor cross section flexible, with ferrule without plastic sleeve	0.25 mm² ... 1.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.25 mm² ... 1.5 mm²
Stripping length	8 mm
I/O
Connection method	Push-in connection
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline Smart Elements” user manual.
Conductor cross section, rigid	0.25 mm² ... 1.5 mm²
Conductor cross section, flexible	0.25 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.25 mm² ... 1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	0.25 mm² ... 1.5 mm²
Stripping length	8 mm

Ambient conditions
Ambient temperature (operation)	-25 °C ... 60 °C
Degree of protection	IP20
Air pressure (operation)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)