AXL SE IOL4 - Communication module Phoenix Contact

Mã sản phẩm: 1088132

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

Axioline Smart Elements, IO-Link master, IO-Link ports Class A: 4, connection method: Push-in connection, connection technology: 3-conductor, degree of protection: IP20

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Dimensional drawing
Width	14.9 mm
Height	62.2 mm
Depth	62 mm

Color

traffic grey A RAL 7042

Smart Element interface
Number of interfaces	1
Connection method	Card edge connector
Transmission speed	See system in which you use the Smart Element.
Start time until ready to operate	< 500 ms

Module
ID code (hex)	none
Process data channel	512 bit
Input address area	64 Byte
Output address area	64 Byte

Digital
Description of the input	IO-Link ports in digital input (DI) mode
Number of inputs	max. 4 (EN 61131-2 type 1)
Connection method	Push-in connection
Connection technology	3-conductor
Nominal input voltage U_IN	24 V DC
Input voltage range "0" signal	-0.3 V DC ... 5 V DC
Input voltage range "1" signal	11 V DC ... 30 V DC
Nominal input current	typ. 2.5 mA
Sensor current per channel	max. 500 mA (from L+/L-)
Input filter time	1 µs
IO-Link
Number of ports	4
Connection method	Push-in connection
Connection technology	3-conductor
Port type	Class A

Digital
Output description	IO-Link ports in digital output (DO) mode
Connection method	Push-in connection
Connection technology	2-, 3-conductor
Number of outputs	max. 4
Nominal output voltage	24 V DC
Nominal current per channel	200 mA

Type	modular
Product type	I/O component
Product family	Axioline Smart Elements
Mounting position	See the system in which the Smart Element is used.
Insulation characteristics
Overvoltage category	II (IEC 60664-1, EN 60664-1)
Pollution degree	2 (IEC 60664-1, EN 60664-1)

Supply: IO-Link
Nominal voltage for I/O supply	24 V DC
Nominal current for every IO-Link port	500 mA (at L+/L-)
Nominal current for every IO-Link port		200 mA (at C/Q)
Protective circuit	Overload protection for L+; electronically limited to 0.6 A
Protective circuit		Short-circuit protection for L+; by switching off after 55 ms
Potentials: Communications power supply of the Smart Elements (U_SE)
Supply voltage	using card edge connectors
Potentials: I/O supply (U_P) incl. IO-Link port supply
Supply voltage	24 V DC (using card edge connectors)
Supply voltage range	19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw	max. 2030 mA (Internal current consumption + full load of the 4 IO-Link ports (4 x 500 mA))
Current draw		typ. 2020 mA
Current consumption	min. 18 mA (without connected peripherals)
Power consumption	max. 61 W (of which 1.45 W internal losses)
Power consumption		min. 432 mW
Protective circuit	Surge protection; See the system in which the Smart Element is used.
Protective circuit		Reverse polarity protection; Polarity protection diode

Connection technology
Connection name	I/O
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline Smart Elements” user manual.
Conductor connection
Connection method	Push-in connection
Conductor cross section rigid	0.25 mm² ... 1.5 mm²
Conductor cross section flexible	0.25 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Conductor cross section flexible, with ferrule without plastic sleeve	0.25 mm² ... 1.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.25 mm² ... 1.5 mm²
Stripping length	8 mm
I/O
Connection method	Push-in connection
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline Smart Elements” user manual.
Conductor cross section, rigid	0.25 mm² ... 1.5 mm²
Conductor cross section, flexible	0.25 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.25 mm² ... 1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	0.25 mm² ... 1.5 mm²
Stripping length	8 mm

Ambient conditions
Ambient temperature (operation)	-25 °C ... 60 °C
Degree of protection	IP20
Air pressure (operation)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)