AXL SE DOR2 W 230 - Relay Module Phoenix Contact

Mã sản phẩm: 1105562

Axioline Smart Elements, Relay module, Relay outputs: 2 (floating), Changeover contact, 220 V DC, 230 V AC, degree of protection: IP20

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Color

traffic grey A RAL 7042

Smart Element interface
Number of interfaces	1
Connection method	Card edge connector
Transmission speed	See system in which you use the Smart Element.
Start time until ready to operate	< 500 ms

Module
ID code (hex)	none
Process data channel	8 bit
Input address area	0 Byte
Output address area	1 Byte
Required parameter data	9 Byte
Required configuration data	6 Byte

Relay
Number of outputs	2 (floating)
Connection method	Push-in connection
Connection technology	2-conductor
Contact type	Changeover contact
Switching current	max. 6 A (up to 250 V AC, cos phi = 0.75 ... 0.8)
		max. 6 A (up to 30 V DC, N/O contact, general use)
		max. 3 A (up to 30 V DC, N/C contact, general use)
		max. 580 mA (at 48 V DC)
		max. 250 mA (at 110 V DC)
		max. 125 mA (at 220 V DC)
		max. 220 mA DC (125 V DC, L/R ≤ 50 ms)
		max. 110 mA DC (250 V DC, L/R ≤ 50 ms)
Switching capacity	max. 1500 VA (AC applications up to 55°C, observe derating above that)
		max. 180 W (up to 30 V DC, N/O contact, general use)
		max. 90 W (up to 30 V DC, N/C contact, general use)
		max. 28 W (above 30 V DC)
		For further DC values, see DC load limit curve.
Switching capacity in accordance with IEC 60947-5-1	3 A (24 V (AC15))
		3 A (120 V (AC15))
		3 A (230 V (AC15))
		2 A (24 V (DC13), L/R = 100 ms)
		0.2 A (110 V (DC13), L/R = 44 ms)
		0.1 A (220 V (DC13), L/R = 44 ms)
Switching capacity in accordance with UL/CSA 61010-2-201	5 A (AC, B300, up to max. 55°C)
Switching capacity in accordance with UL/CSA 61010-2-201		1 A (DC, R300, up to max. 60°C)
Switching frequency	max. 6 (per minute)
Mechanical service life	20x 10⁶ cycles

Type	modular
Product type	I/O component
Product family	Axioline Smart Elements
Mounting position	See the system in which the Smart Element is used.
Insulation characteristics
Overvoltage category	III (EN 61010-2-201/IEC 61010-2-201)
Pollution degree	2 (IEC 60664-1, EN 60664-1)

Potentials: Communications power supply of the Smart Elements (U_SE)
Supply voltage	using card edge connectors
Potentials: I/O supply (U_P)
Supply voltage	24 V DC (using card edge connectors)
Supply voltage range	19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw	typ. 36 mA (18 mA per relay, all contacts floating)
Protective circuit	Surge protection; See the system in which the Smart Element is used.
Protective circuit		Reverse polarity protection; parallel diode

Connection technology
Connection name	I/O
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline Smart Elements” user manual.
Note on the connection method		When selecting the cables, observe the permissible operating temperature in accordance with IEC or UL.
Conductor connection
Connection method	Push-in connection
Conductor cross section rigid	0.25 mm² ... 1.5 mm²
Conductor cross section flexible	0.25 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Conductor cross section flexible, with ferrule without plastic sleeve	0.25 mm² ... 1.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.25 mm² ... 0.75 mm²
Stripping length	8 mm
I/O
Connection method	Push-in connection
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline Smart Elements” user manual.
Note on the connection method		When selecting the cables, observe the permissible operating temperature in accordance with IEC or UL.
Conductor cross section, rigid	0.25 mm² ... 1.5 mm²
Conductor cross section, flexible	0.25 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.25 mm² ... 0.75 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	0.25 mm² ... 1.5 mm²
Stripping length	8 mm

Ambient conditions
Ambient temperature (operation)	-25 °C ... 60 °C
Degree of protection	IP20
Air pressure (operation)	80 kPa ... 106 kPa
Air pressure (storage/transport)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)