AXL SE DO4/2 2A EF - Digital module Phoenix Contact

Mã sản phẩm: 1181790

Axioline Smart Elements, Digital output module, Digital outputs: 4, 24 V DC, 2 A, connection technology: 2-conductor, degree of protection: IP20

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Color

traffic grey A RAL 7042

Smart Element interface
Number of interfaces	1
Connection method	Card edge connector
Transmission speed	See system in which you use the Smart Element.
Start time until ready to operate	< 500 ms

Module
ID code (hex)	none
Process data channel	8 bit
Input address area	1 Byte
Output address area	1 Byte
Required parameter data	3 Byte
Required configuration data	7 Byte

Digital
Output name	Digital outputs
Connection method	Push-in connection
Connection technology	2-conductor
Number of outputs	4
Protective circuit	Short-circuit and overload protection; electronic
Output voltage	24 V DC
Maximum output current per module	max. 8 A (provide external fuse protection; observe the derating.)
Nominal output voltage	24 V DC
Output voltage when switched off	max. 1 V
Output current when switched off	max. 300 µA
Nominal load, inductive	48 VA (1.2 H, 12 Ω, at 24 V DC)
Nominal load, lamp	24 W (at 24 V DC)
Nominal load, ohmic	48 W (12 Ω, in the supply voltage range)
Switching frequency	max. 1200 per second (With resistive load, at least 50 mA load current)
		max. 1 per second (with inductive load)
		max. 4 per second (with nominal lamp load)
Behavior with overload	Shutdown with automatic restart
Behavior with inductive overload	Output can be destroyed

Type	modular
Product type	I/O component
Product family	Axioline Smart Elements
Mounting position	See the system in which the Smart Element is used.
Insulation characteristics
Overvoltage category	II (IEC 60664-1, EN 60664-1)
Pollution degree	2 (IEC 60664-1, EN 60664-1)

Potentials: I/O supply (U_O)
Supply voltage	24 V DC
Supply voltage range	19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw	max. 8 A (provide external protection)
Power consumption	max. 240 W (of which 2 W constitute internal losses)
Protective circuit	Surge protection; electronic (35 V, 0.5 s)
Protective circuit		Reverse polarity protection; parallel diode
Potentials: Communications power supply of the Smart Elements (U_SE)
Supply voltage	using card edge connectors

Connection technology
Connection name	I/O
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline Smart Elements” user manual.
Conductor connection
Connection method	Push-in connection
Conductor cross section rigid	0.25 mm² ... 1.5 mm²
Conductor cross section flexible	0.25 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Conductor cross section flexible, with ferrule without plastic sleeve	0.25 mm² ... 1.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.25 mm² ... 1.5 mm²
Stripping length	8 mm
I/O
Connection method	Push-in connection
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline Smart Elements” user manual.
Conductor cross section, rigid	0.25 mm² ... 1.5 mm²
Conductor cross section, flexible	0.25 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.25 mm² ... 1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	0.25 mm² ... 1.5 mm²
Stripping length	8 mm

Ambient conditions
Ambient temperature (operation)	-25 °C ... 60 °C
Degree of protection	IP20
Air pressure (operation)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)