AXL SE DO16/1 - Digital module Phoenix Contact

Mã sản phẩm: 1088129

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

Axioline Smart Elements, Digital output module, Digital outputs: 16, 24 V DC, 500 mA, connection technology: 1-conductor, degree of protection: IP20

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Dimensional drawing
Width	14.9 mm
Height	62.2 mm
Depth	62 mm

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Color

traffic grey A RAL 7042

Smart Element interface
Number of interfaces	1
Connection method	Card edge connector
Transmission speed	See system in which you use the Smart Element.
Start time until ready to operate	< 500 ms

Module
ID code (hex)	none
Process data channel	16 bit
Input address area	0 Byte
Output address area	2 Byte
Required parameter data	9 Byte
Required configuration data	6 Byte

Digital
Output name	Digital outputs
Connection method	Push-in connection
Connection technology	1-conductor
Number of outputs	16
Protective circuit	Short-circuit and overload protection; electronic
Output voltage	24 V
Maximum output current per module	6 A (Also make sure that the maximum permissible current of 6 A is not exceeded.)
Nominal output voltage	24 V DC
Output voltage when switched off	max. 1 V
Output current when switched off	max. 300 µA
Nominal load, inductive	12 VA (1.2 H, 48 Ω, with nominal voltage)
Nominal load, lamp	12 W (at nominal voltage)
Nominal load, ohmic	12 W (48 Ω, with nominal voltage)
Switching frequency	max. 1200 per second (With resistive load, at least 50 mA load current)
		max. 1 per second (with inductive load)
		max. 16 per second (with nominal lamp load)
Reverse voltage resistance to short pulses	limited protection up to 0.5 A for 1 s
Behavior with overload	Shutdown with automatic restart
Behavior with inductive overload	Output can be destroyed

Type	modular
Product type	I/O component
Product family	Axioline Smart Elements
Mounting position	See the system in which the Smart Element is used.
Insulation characteristics
Overvoltage category	II (IEC 60664-1, EN 60664-1)
Pollution degree	2 (IEC 60664-1, EN 60664-1)

Potentials: Communications power supply of the Smart Elements (U_SE)
Supply voltage	using card edge connectors
Potentials: I/O supply (U_P)
Supply voltage	24 V DC (using card edge connectors)
Supply voltage range	19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw	max. 6 A
Current consumption	min. 40 mA (without connected peripherals)
Power consumption	max. 180 W (of which 1.1 W internal losses)
Power consumption		min. 288 mW
Protective circuit	Surge protection; See the system in which the Smart Element is used.
Protective circuit		Reverse polarity protection; parallel diode

Connection technology
Connection name	I/O
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline Smart Elements” user manual.
		With a small conductor cross section and high current, the terminal point temperature can reach up to 45 K above the ambient temperature.
		When selecting the cables, observe the permissible operating temperature in accordance with IEC or UL.
Conductor connection
Connection method	Push-in connection
Conductor cross section rigid	0.25 mm² ... 1.5 mm²
Conductor cross section flexible	0.25 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Conductor cross section flexible, with ferrule without plastic sleeve	0.25 mm² ... 1.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.25 mm² ... 1.5 mm²
Stripping length	8 mm
I/O
Connection method	Push-in connection
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline Smart Elements” user manual.
		With a small conductor cross section and high current, the terminal point temperature can reach up to 45 K above the ambient temperature.
		When selecting the cables, observe the permissible operating temperature in accordance with IEC or UL.
Conductor cross section, rigid	0.25 mm² ... 1.5 mm²
Conductor cross section, flexible	0.25 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.25 mm² ... 1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	0.25 mm² ... 1.5 mm²
Stripping length	8 mm

Ambient conditions
Ambient temperature (operation)	-25 °C ... 60 °C
Degree of protection	IP20
Air pressure (operation)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)