AXL P EX IS AO4 HART 1F - Analog module Phoenix Contact

Mã sản phẩm: 1087082

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

Axioline P, Analog output module, Analog outputs: 4 (HART), 0 mA ... 20 mA, 4 mA ... 20 mA, connection technology: 2-conductor, transmission speed in the local bus: 100 Mbps, HART functionality, degree of protection: IP20, including bus base module and connectors

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Dimensional drawing
Width	53.6 mm
Height	126.1 mm
Depth	77.14 mm
Note on dimensions	The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area
Utilization restriction
CCCex note	Use in potentially explosive areas is not permitted in China.

Color

traffic grey A RAL 7042

Axioline P local bus
Connection method	Connection for bus base module
Transmission speed	100 Mbps

Analog
Output name	Analog outputs
Connection method	Push-in connection
Connection technology	2-conductor
Note regarding the connection technology	shielded, twisted pair
Number of outputs	4 (HART)
Current output signal	0 mA ... 20 mA
Current output signal		4 mA ... 20 mA

Type	block modular
Product type	I/O component
Product family	Axioline P
Mounting position	any (no temperature derating)
Scope of delivery	including bus base module and connectors
Insulation characteristics
Overvoltage category	II
Pollution degree	2

Potentials: Supply of the logic voltage U_L
Supply voltage range	19.2 V DC ... 30 V DC (via bus base module (U_L) at AXL P BK...)
Potentials: Supply of the Axioline P local bus U_Bus
Supply voltage	5 V DC (via bus base module)
Current draw	max. 135 mA
Potentials: Axioline P extension module supply voltage
Supply voltage	U_L (via bus base module)
Current draw	max. 160 mA (via bus base module)

Connection technology
Connection name	Axioline P connector
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline P: system and installation” user manual.
Conductor connection
Connection method	Push-in connection
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Stripping length	8 mm
Axioline P connector
Connection method	Push-in connection
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline P: system and installation” user manual.
Conductor cross section, rigid	0.2 mm² ... 1.5 mm²
Conductor cross section, flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Stripping length	8 mm

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 70 °C (Standard)
Degree of protection	IP20
Air pressure (operation)	70 kPa ... 106 kPa (up to 2000 m above sea level)
Air pressure (storage/transport)	70 kPa ... 106 kPa (up to 2000 m above sea level)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)

Protection class

III (IEC 61140, EN 61140, VDE 0140-1)

ATEX
Identification	II 3(1) G Ex ec [ia Ga] IIC T4 Gc II (1) D [Ex ia Da] IIIC
Certificate	DEMKO 20 ATEX 2370X
IECEx
Identification	Ex ec [ia Ga] IIC T4 Gc [Ex ia Da] IIIC
Certificate	IECEx UL 20.0044X
UKCA Ex (UKEX)
Identification	II 3(1) G Ex ec [ia Ga] IIC T4 Gc II (1) D [Ex ia Da] IIIC
Certificate	UL22UKEX2508X
Ex data
UL, USA / Canada	Ind. Cont. Eq. (E238705) also Listed Ind. Cont. Eq. for haz. loc. E196811 Install in: Class I, Div. 2, Groups A, B, C, D T4 Intrinsically safe outputs for: Class I, Groups A, B, C, D; Class II, Groups E, F, G; Class III; [Ex ia] Haz loc Class I, Zone 2, AEx ec [ia Ga] IIC T4 Gc [AEx ia Da] IIIC Ex ec [ia Ga] IIC T4 Gc [Ex ia Da] IIIC

Mounting type	DIN rail mounting
Mounting position	any (no temperature derating)

Safety data
Max. output voltage U_o	24.8 V
Max. output current I_o	86.7 mA
Max. output power P_o	538 mW
Safety-related maximum voltage U_m	250 V
A, B / IIC ((A, B, or IIC)): Max. external inductivity L_o / Max. external capacitance C_o	/ 0.112 µF
C/IIB, IIIC ((C, IIB, or IIIC)): Max. external inductivity L_o / Max. external capacitance C_o	/ 0.859 µF
D/IIA, E, F, G, Class III ((D, E, F, G, Class III, or IIA)): Max. external inductivity L_o / Max. external capacitance C_o	/ 3.049 µF
A, B / IIC ((A, B, or IIC)): Max. external inductivity L_o / Max. external capacitance C_o	4.1 mH
C/IIB, IIIC ((C, IIB, or IIIC)): Max. external inductivity L_o / Max. external capacitance C_o	18.29 mH
D/IIA, E, F, G, Class III ((D, E, F, G, Class III, or IIA)): Max. external inductivity L_o / Max. external capacitance C_o	37.21 mH