AXL P BK PN - Bus coupler Phoenix Contact

Mã sản phẩm: 1132800

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

Axioline P bus coupler for PROFINET. Connects to Axioline P I/O modules along the AXIOLINE P local bus. (includes power supply connector and bus base module)

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Dimensional drawing
Width	45 mm
Height	126.93 mm
Depth	75 mm
Note on dimensions	The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area
Utilization restriction
CCCex note	Use in potentially explosive areas is not permitted in China.

Color

gray

Axioline P local bus
Connection method	Connection for bus base module
Transmission speed	100 Mbps
PROFINET
No. of channels	2
Connection method	RJ45 socket, auto negotiation and auto crossing
Transmission speed	100 Mbps (Full duplex)
Transmission physics	Ethernet in RJ45 twisted pair
Fieldbus: Local bus gateway
Max. number of local bus devices	63 (AXL P I/O modules. Consider the logic current consumed by the devices)

System limits
Number of supported devices	max. 63 (per station)
PROFINET
Device function	PROFINET device

Type	block modular
Product type	I/O component
Product family	Axioline P
Mounting position	any
Scope of delivery	including bus base module and connectors
Insulation characteristics
Overvoltage category	II
Pollution degree	2

Maximum power dissipation for nominal condition	5 W
Potentials
Protective circuit	Surge protection of the supply voltage; electronic
Protective circuit		Polarity reversal protection of the supply voltage; electronic
Potentials: Supply of the bus coupler
Supply voltage	24 V DC (U_L)
Supply voltage range	19.2 V DC ... 30 V DC
Current draw	4.15 A (19.2 V DC)
Current draw		125 mA (24 V DC)
Potentials: Supply of the Axioline P local bus U_Bus
Supply voltage	5 V DC (via bus base module)
Current draw	3 A (via bus base module)
Potentials: Axioline P extension module supply voltage
Supply voltage	U_L (via bus base module)
Current draw	3 A (via bus base module)

Connection technology
Connection name	Power supply
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline P: system and installation” user manual.
Conductor connection
Connection method	Push-in connection
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Stripping length	8 mm
Power supply
Connection method	Push-in connection
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline P: system and installation” user manual.
Conductor cross section, rigid	0.2 mm² ... 1.5 mm²
Conductor cross section, flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Stripping length	8 mm

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 70 °C (Mounting position: wall mounting on horizontal DIN rail)
Degree of protection	IP20
Air pressure (operation)	70 kPa ... 106 kPa (up to 2000 m above sea level)
Air pressure (storage/transport)	70 kPa ... 106 kPa (up to 2000 m above sea level)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)

Protection class

III (IEC 61140, EN 61140, VDE 0140-1)

ATEX
Identification	 II 3 G Ex ec IIC T4 Gc
Certificate	IBExU 18ATEXB018 X
IECEx
Identification	Ex ec IIC T4 Gc
Certificate	IECEx IBE 18.0023X
UKCA Ex (UKEX)
Identification	II 3G Ex ec IIC T4 Gc X
Certificate	PxCAI22UKEx2316390X
Ex data
UL, USA / Canada	Class I, Div. 2, Groups A, B, C, D T4 Class I, Zone 2, IIC T4