AXL P AI8 HART 1F - Analog module Phoenix Contact

Mã sản phẩm: 1052429

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

Axioline P, Analog input module, Active analog inputs: 8 (HART), 4 mA ... 20 mA, connection technology: 2-conductor, transmission speed in the local bus: 100 Mbps, HART functionality, degree of protection: IP20

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Dimensional drawing
Width	53.6 mm
Height	126.1 mm
Depth	77.14 mm
Note on dimensions	The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area
Utilization restriction
CCCex note	Use in potentially explosive areas is not permitted in China.

Color

traffic grey A RAL 7042

Axioline P local bus
Connection method	Bus base module
Transmission speed	100 Mbps

Analog
Input name	Active analog inputs
Description of the input	HART enabled, passive analog input signals
Number of inputs	8 (HART)
Connection method	Push-in connection
Connection technology	2-conductor
Note regarding the connection technology	shielded, twisted pair
Current input signal	4 mA ... 20 mA
Protective circuit	Polarity reversal protection of the inputs

Type	block modular
Product type	I/O component
Product family	Axioline P
Mounting position	any (no temperature derating)
Insulation characteristics
Overvoltage category	II
Pollution degree	2

Potentials: Supply of the logic voltage U_L
Supply voltage range	19.2 V DC ... 30 V DC (via bus base module (U_L) at AXL P BK...)
Potentials: Supply of the Axioline P local bus U_Bus
Supply voltage	5 V DC (via bus base module)
Current draw	max. 135 mA
Potentials: Axioline P extension module supply voltage
Supply voltage	U_L (via bus base module)
Current draw	max. 260 mA (via bus base module)

Connection technology
Connection name	Axioline P connector
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline P: system and installation” user manual.
Conductor connection
Connection method	Push-in connection
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Stripping length	8 mm
Axioline P connector
Connection method	Push-in connection
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline P: system and installation” user manual.
Conductor cross section, rigid	0.2 mm² ... 1.5 mm²
Conductor cross section, flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Stripping length	8 mm

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 70 °C (Standard)
Degree of protection	IP20
Air pressure (operation)	70 kPa ... 106 kPa (up to 2000 m above sea level)
Air pressure (storage/transport)	70 kPa ... 106 kPa (up to 2000 m above sea level)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)

Protection class

III (IEC 61140, EN 61140, VDE 0140-1)

ATEX
Identification	II 3G Ex ec IIC T4 Gc
Certificate	DEMKO 20 ATEX 2334X
IECEx
Identification	Ex ec IIC T4 Gc
Certificate	IECEx UL 20.0002X
UKCA Ex (UKEX)
Identification	II 3G Ex ec IIC T4 Gc
Certificate	PxCAI22UKEx1052416X
CCC Ex
Identification	Ex e ib mb [ia Ga] IIC T4 Gb [Ex iaD]
Certificate	2022122310115622
Ex data
UL, USA / Canada	Class I, Div. 2, Groups A, B, C, D T4 Class I, Zone 2, IIC T4