AXL F SSDOR4/2 1F - Safety module Phoenix Contact

Mã sản phẩm: 2702859

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

Safety-related distributed relay output module, IP20 degree of protection, for SafetyBridge systems. The module has four safe relay outputs, each with one floating contact.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Dimensional drawing
Width	53.6 mm
Height	126.1 mm
Depth	54 mm
Note on dimensions	Housing dimensions

Axioline F local bus
Connection method	Bus base module

Module
Input address area	8 Byte
Output address area	8 Byte
Required parameter data	1 Byte
Required configuration data	7 Byte

Digital
Input name	Signal inputs
Number of inputs	2
Input voltage	Power supply from clock outputs UT1 and UT2
Nominal input current at U_IN	typ. 3.2 mA

Digital
Output name	Outputs OUT24V_0 and OUT24V_1
Number of outputs	2
Nominal output voltage	Power supply from U₀ or U₁
Relay
Number of outputs	4 (floating)
Contact type	N/O contact
Switching voltage	min. 12 V AC/DC
Switching voltage		max. 30 V AC/DC
Switching current	min. 3 mA
Switching current		max. 6 A (30 V DC)
Switching capacity	min. 60 mW
Limiting continuous current	6 A
Mechanical service life	10x 10⁶ cycles
Output fuse	6 A gL/gG (See “Application examples” section)

Type	modular
Product type	I/O component
Product family	Axioline F
Mounting position	any
Application	Functional safety
Operating mode	SafetyBridge
Insulation characteristics
Overvoltage category	II (IEC 60664-1)
Pollution degree	2 (IEC 60664-1)

Transmission medium	Copper
Potentials
Protection	max. 500 mA slow-blow (for U_I)
Protection		max. 6 A gL/gG ()
Protective circuit	Polarity reversal protection of the supply voltage; parallel protection against polarity reversal for a limited period of time
		Surge voltage detection; at 31 V
		Undervoltage detection; at 17 V
		Surge protection of the supply voltage; electronic (35 V, 0.5 s)
Potentials: Axioline F local bus supply (U_Bus)
Supply voltage	5 V DC (via bus base module)
Current draw	max. 163 mA (at U_Bus 5 V DC)
Current draw		typ. 93 mA (at U_Bus 5 V DC)
Potentials: Supply voltage U_I for EDM
Supply voltage	24 V DC
Supply voltage range	19.2 V DC ... 30.2 V DC (including all tolerances, including ripple)
Current draw	max. 30 mA
Current draw		typ. 10 mA (Power supply from U_I with 30 V DC, all inputs set)
Potentials: Feed-in U₀ and U₁ for safe I/O supply
Supply voltage	24 V DC
Supply voltage range	19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw	max. 6 A
Current draw		typ. 1.6 mA (Power supply from U₀ with 30 V DC, all inputs set without load)

Connection technology
Connection name	I/O
Note on the connection method	Note the specification in the section Conductor cross sections, and stripping and insertion lengths.
Conductor connection
Connection method	Push-in connection
Conductor cross section rigid	0.5 mm² ... 1.5 mm²
Conductor cross section flexible	0.5 mm² ... 1.5 mm²
Conductor cross section AWG	20 ... 16
Stripping length	8 mm
I/O
Connection method	Push-in connection
Note on the connection method	Note the specification in the section Conductor cross sections, and stripping and insertion lengths.
Conductor cross section, rigid	0.5 mm² ... 1.5 mm²
Conductor cross section, flexible	0.5 mm² ... 1.5 mm²
Conductor cross section AWG	20 ... 16
Stripping length	8 mm

Ambient conditions
Ambient temperature (operation)	-35 °C ... 60 °C
Degree of protection	IP20
Degree of protection at installation location	min. IP54
Air pressure (operation)	70 kPa ... 108 kPa
Air pressure (storage/transport)	66 kPa ... 108 kPa
Ambient temperature (storage/transport)	-40 °C ... 85 °C