AXL F SGI2 1H - Analog module Phoenix Contact

Mã sản phẩm: 2702911

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

Axioline F, Strain gauge capture module, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Dimensional drawing
Width	35 mm
Height	126.1 mm
Depth	54 mm
Note on dimensions	The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).

Color

traffic grey A RAL 7042

Axioline F local bus
Number of interfaces	2
Connection method	Bus base module
Transmission speed	100 Mbps

Module
ID code (hex)	none
Input address area	12 Byte
Output address area	12 Byte
Required parameter data	48 Byte
Required configuration data	7 Byte

Analog
Description of the input	Input channels for strain gauge
Number of inputs	2
Connection technology	6 or 4-wire, twisted pair shielded cable
Bridge difference U_d	Measuring range specified by selecting the characteristic
Bridge difference U_d		-35 mV ... +35 mV
Bridge voltage U₀	5 V
Measured value representation	32 bits
Characteristics	can be parameterized: 350 μV/V ... 6500 μV/V
Contacts
Description	Floating N/O contact
Quantity	2 (K_a1-K_b1, K_a2-K_b2)
Contact resistance	< 1 Ω (typical)
Contact resistance		< 3 Ω (maximum)
Typical response time	typ. 0.2 ms (opening)
Typical response time		typ. 2 ms (close)

Analog
Output description	Jumper supply
Number of outputs	2
Impedance	> 43 Ω (per channel)
Output voltage	typ. 5 V
Output current	max. 115 mA (per channel)

Type	block modular
Product type	I/O component
Product family	Axioline F
Mounting position	any (no temperature derating)
Scope of delivery	including bus base module and Axioline F connectors
Operating mode	Process data mode with 6 words

Potentials
Power consumption	typ. 1.5 W (entire device)
Power consumption		max. 3 W (entire device)
Potentials: Axioline F local bus supply (U_Bus)
Supply voltage	5 V DC (via bus base module)
Current draw	max. 75 mA
Current draw		typ. 65 mA
Power consumption	max. 375 mW
Power consumption		typ. 325 mW
Potentials: Supply for analog modules (U_A)
Supply voltage	24 V DC
Supply voltage range	19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw	typ. 110 mA (with maximum load: 8 weighing cells with 350 Ω per channel)
		typ. 25 mA (with typical load: 1 weighing cell with 350 Ω, only one channel loaded)
		typ. 55 mA (with maximum load: 8 weighing cells with 350 Ω, only one channel loaded)
Power consumption	typ. 2.6 W (with maximum load: 8 weighing cells with 350 Ω per channel)
Protective circuit	Surge protection; Suppressor diode
Protective circuit		Reverse polarity protection; Polarity protection diode

Connection technology
Connection name	Axioline F connector
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
Note on the connection method		Applications with UL approval: only use copper conductors.
Conductor connection
Connection method	Push-in connection
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Stripping length	8 mm
Axioline F connector
Connection method	Push-in connection
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
Note on the connection method		Applications with UL approval: only use copper conductors.
Conductor cross section, rigid	0.2 mm² ... 1.5 mm²
Conductor cross section, flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Stripping length	8 mm

Ambient conditions
Ambient temperature (operation)	-25 °C ... 60 °C
Degree of protection	IP20
Air pressure (operation)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)