AXL F RTD8 1F - Temperature module Phoenix Contact

Mã sản phẩm: 2688077

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

Axioline F, Temperature recording module, Analog inputs: 8 (for resistance temperature detectors), connection technology: 2-, 3-, 4-conductor (shielded), transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Dimensional drawing
Width	53.6 mm
Height	126.1 mm
Depth	54 mm
Note on dimensions	The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).

Color

traffic grey A RAL 7042

Axioline F local bus
Number of interfaces	2
Connection method	Bus base module
Transmission speed	100 Mbps

Module
Input address area	16 Byte
Output address area	16 Byte
Required parameter data	20 Byte
Required configuration data	6 Byte

Analog
Input name	Analog inputs
Description of the input	Inputs for resistive temperature sensors
Number of inputs	8 (for resistance temperature detectors)
Connection method	Push-in connection
Connection technology	2-, 3-, 4-conductor (shielded)
A/D converter resolution	24 bit
Sensor types (RTD) that can be used	Pt, Ni, KTY, Cu sensors
Data formats	IB IL, S7-compatible
Measured value representation	16 bits (15 bits + sign bit)
Input filter time	40 ms
		60 ms
		100 ms
		120 ms (adjustable)
Nominal value of the current sources	1 mA (Pt 100, Ni 100, R_Lin 500 Ω; pulse current, the specification is valid during the sampling phase)
Nominal value of the current sources		210 µA (P t1000, Ni 1000, R_Lin 5000 Ω; pulse current, the specification is valid during the sampling phase)
Linear resistance measuring range	0 Ω ... 500 Ω
Linear resistance measuring range		0 kΩ ... 5 kΩ
Protective circuit	Short-circuit protection, overload protection of the inputs
		Transient protection of inputs
		Transient protection of sensor supplies

Type	block modular
Product type	I/O component
Product family	Axioline F
Mounting position	any (no temperature derating)
Scope of delivery	including bus base module and Axioline F connectors
Insulation characteristics
Overvoltage category	II (IEC 60664-1, EN 60664-1)
Pollution degree	2 (IEC 60664-1, EN 60664-1)

Maximum power dissipation for nominal condition	0.9 W
Potentials
Power consumption	typ. 0.94 W (at U_Bus and U_A (up to HW 06))
		typ. 0.59 W (at U_Bus and U_A (from HW 07))
		max. 1.5 W (at U_Bus and U_A (up to HW 06))
		max. 1.03 W (at U_Bus and U_A (from HW 07))
Potentials: Axioline F local bus supply (U_Bus)
Supply voltage	5 V DC (via bus base module)
Current draw	max. 180 mA (up to HW 06)
		max. 85 mA (from HW 07)
		typ. 115 mA (up to HW 06)
		typ. 60 mA (from HW 07)
Power consumption	max. 900 mW (up to HW 06)
		max. 425 mW (from HW 07)
		typ. 580 mW (up to HW 06)
		typ. 300 mW (from HW 07)
Potentials: Supply for analog modules (U_A)
Supply voltage	24 V DC
Supply voltage range	19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw	max. 25 mA
		typ. 15 mA (up to HW 06)
		typ. 12 mA (from HW 07)
Power consumption	max. 0.6 W
Protective circuit	Surge protection; electronic (35 V, 0.5 s)
		Reverse polarity protection; Polarity protection diode
		Transient protection; Suppressor diode

Connection technology
Connection name	Axioline F connector
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
Conductor connection
Connection method	Push-in connection
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Stripping length	8 mm
Axioline F connector
Connection method	Push-in connection
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
Conductor cross section, rigid	0.2 mm² ... 1.5 mm²
Conductor cross section, flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Stripping length	8 mm

Ambient conditions
Ambient temperature (operation)	-25 °C ... 60 °C
Degree of protection	IP20
Air pressure (operation)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)