AXL F PSDOR4/2 1F - Safety module Phoenix Contact

Mã sản phẩm: 2702858

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

Axioline F, Relay module, Functional safety, PROFIsafe, only for connection to Phoenix Contact or Siemens controller, Signal inputs: 2, Outputs OUT24V_0 and OUT24V_1: 2, Safe relay outputs: 4 (floating), N/O contact, degree of protection: IP20

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Dimensional drawing
Width	53.6 mm
Height	126.1 mm
Depth	54 mm
Note on dimensions	Housing dimensions

Axioline F local bus
Connection method	Bus base module

Module
Input address area	5 Byte
Output address area	6 Byte
Required parameter data	20 Byte ((I-and F-parameters))
Required configuration data	10 Byte

Digital
Input name	Signal inputs
Number of inputs	2
Input voltage	Power supply from clock outputs UT1 and UT2
Nominal input current at U_IN	typ. 3.2 mA

Digital
Output name	Outputs OUT24V_0 and OUT24V_1
Number of outputs	2
Nominal output voltage	Power supply from U₀ or U₁
Relay
Number of outputs	4 (floating)
Contact type	N/O contact
Switching voltage	min. 12 V AC/DC
Switching voltage		max. 30 V AC/DC
Switching current	min. 3 mA
Switching current		max. 6 A (30 V DC)
Switching capacity	min. 60 mW
Limiting continuous current	6 A
Mechanical service life	10x 10⁶ cycles
Output fuse	6 A gL/gG (See “Application examples” section)

Type	modular
Product type	I/O component
Product family	Axioline F
Mounting position	any
Application	Functional safety
		PROFIsafe
		only for connection to Phoenix Contact or Siemens controller
Operating mode	PROFIsafe 2.4, PROFIsafe 2.6.1
Insulation characteristics
Overvoltage category	II (IEC 60664-1)
Pollution degree	2 (IEC 60664-1)

Transmission medium	Copper
Potentials
Protection	max. 500 mA slow-blow (for U_I)
Protection		max. 6 A gL/gG ()
Protective circuit	Polarity reversal protection of the supply voltage; parallel protection against polarity reversal for a limited period of time
		Surge voltage detection; at 31 V
		Undervoltage detection; at 17 V
		Surge protection of the supply voltage; electronic (35 V, 0.5 s)
Potentials: Axioline F local bus supply (U_Bus)
Supply voltage	5 V DC (via bus base module)
Current draw	max. 163 mA (at U_Bus 5 V DC)
Current draw		typ. 93 mA (at U_Bus 5 V DC)
Potentials: Supply voltage U_I for EDM
Supply voltage	24 V DC
Supply voltage range	19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw	max. 30 mA
Current draw		typ. 10 mA (Power supply from U_I with 30 V DC, all inputs set)
Potentials: Feed-in U₀ and U₁ for safe I/O supply
Supply voltage	24 V DC
Supply voltage range	19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw	max. 6 A
Current draw		typ. 1.6 mA (Power supply from U₀ with 30 V DC, all inputs set without load)

Connection technology
Connection name	I/O
Note on the connection method	Note the specification in the section Conductor cross sections, and stripping and insertion lengths.
Conductor connection
Connection method	Push-in connection
Conductor cross section rigid	0.5 mm² ... 1.5 mm²
Conductor cross section flexible	0.5 mm² ... 1.5 mm²
Conductor cross section AWG	20 ... 16
Stripping length	8 mm
I/O
Connection method	Push-in connection
Note on the connection method	Note the specification in the section Conductor cross sections, and stripping and insertion lengths.
Conductor cross section, rigid	0.5 mm² ... 1.5 mm²
Conductor cross section, flexible	0.5 mm² ... 1.5 mm²
Conductor cross section AWG	20 ... 16
Stripping length	8 mm

Ambient conditions
Ambient temperature (operation)	-35 °C ... 60 °C
Degree of protection	IP20
Degree of protection at installation location	min. IP54
Air pressure (operation)	70 kPa ... 108 kPa
Air pressure (storage/transport)	66 kPa ... 108 kPa
Ambient temperature (storage/transport)	-40 °C ... 85 °C