AXL F MA DALI2 1H - Communication module Phoenix Contact

Mã sản phẩm: 2702864

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

Axioline F, DALI master, Single client, two channels, integrated DALI power supply unit, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Dimensional drawing
Width	35 mm
Height	126.1 mm
Depth	54 mm
Note on dimensions	The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).

Color

traffic grey A RAL 7042

DALI
Number of interfaces	2
Connection method	Push-in connection
Axioline F local bus
Number of interfaces	2
Connection method	Bus base module
Transmission speed	100 Mbps
Fieldbus: DALI
Designation	DALI
Note	The data apply for DALI bus 1 and DALI bus 2, respectively.
Connection method	Push-in connection
No. of channels	2 (DALI 1, DALI 2)
Supply voltage	typ. 16 V DC (Bus voltage)
Output current	230 mA (guaranteed)
Output current with short-circuit	max. 250 mA
Current carrying capacity	max. 195 mA (Bus load, see derating)
Transmission speed	1200 bps
Type of protection	Bus protected up to 250 V AC, maximum

Module
Input address area	8 Byte
Output address area	8 Byte

Type	block modular
Product type	I/O component
Product family	Axioline F
Mounting position	any (no temperature derating)
Scope of delivery	including bus base module and Axioline F connectors
Insulation characteristics
Overvoltage category	II (IEC 60664-1, EN 60664-1)
Pollution degree	2 (IEC 60664-1, EN 60664-1)

Potentials: Axioline F local bus supply (U_Bus)
Supply voltage	5 V DC (via bus base module)
Current draw	max. 65 mA
Power consumption	max. 325 mW
Potentials: Feed-in of supply voltage (U_I)
Supply voltage	24 V DC
Supply voltage range	19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw	max. 470 mA (at nominal voltage)
Current draw		typ. 250 mA
Power consumption	max. 8.8 W (both channels loaded with 195 mA)
Protective circuit	Surge protection; electronic (35 V, 0.5 s)
		Reverse polarity protection; parallel diode; with external 5 A fuse
		Transient protection; Suppressor diode

Connection technology
Connection name	Axioline F connector
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
Conductor connection
Connection method	Push-in connection
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Stripping length	8 mm
Axioline F connector
Connection method	Push-in connection
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
Conductor cross section, rigid	0.2 mm² ... 1.5 mm²
Conductor cross section, flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Stripping length	8 mm

Ambient conditions
Ambient temperature (operation)	-25 °C ... 60 °C
Degree of protection	IP20
Air pressure (operation)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)