AXL F LPSDO8/3 1F - Safety module Phoenix Contact

Mã sản phẩm: 2702171

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

Safety-related digital output module, IP20 protection, for the SafetyBridge system. The module has four safe digital outputs with two-channel occupancy or 8 safe digital outputs with single-channel occupancy

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Dimensional drawing
Width	53.6 mm
Height	126.1 mm
Depth	54 mm
Note on dimensions	Housing dimensions

Axioline F local bus
Connection method	Bus base module

SafetyBridge properties
Connection to I/O modules	max. 16 (safe digital I/O modules)
Logic memory	30 kByte
Module
Input address area	48 Byte
Output address area	48 Byte
Required parameter data	1 Byte
Required configuration data	7 Byte

Digital
Output name	Digital outputs
Number of outputs	4 (for 2-channel assignment)
		8 (for 1-channel assignment)
		8
Protective circuit	Overload protection, freewheeling circuit for inductive loads,Discharge circuit for accelerated discharge of capacitive loads
Output voltage	24 V DC
Output current	max. 2 A (per channel)
		max. 1.5 A (per channel according to CUL_US)
		max. 4 A (per group)
		max. 3 A (per group according to CUL_US)
		max. 8 A (Total current of all outputs; Please observe the notes in the user manual.)
		max. 6 A (Total current of all outputs according to CUL_US)
Maximum output current per channel	2 A
Maximum output current per module / terminal block	8 A
Permissible cable length	max. 1000 m (Forward and return line in total)
Behavior with overload	Affected output is disabled and a diagnostic message is generated.

Type	modular
Product type	I/O component
Product family	Axioline F
Application	Functional safety
Application		SafetyBridge

Transmission medium	Copper
Potentials
Protective circuit	Protection against polarity reversal, EMC protective circuit, undervoltage detection
Potentials: Axioline F local bus supply (U_Bus)
Supply voltage	5 V DC (via bus base module)
Current draw	max. 280 mA
Current draw		typ. 260 mA (all outputs set; supply by U_O of 19.2 V DC ... 30 V DC)
Potentials: Supply for digital output modules (U_O)
Supply voltage	24 V DC
Supply voltage range	19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw	typ. 25 mA (all outputs set; supply from U_O with 30 V DC; without supply to the actuators)

Connection technology
Connection name	Axioline F connector
Conductor connection
Connection method	Spring-cage connection
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Axioline F connector
Connection method	Spring-cage connection
Conductor cross section, rigid	0.2 mm² ... 1.5 mm²
Conductor cross section, flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16

Ambient conditions
Ambient temperature (operation)	-35 °C ... 60 °C (Mounting position: any)
Degree of protection	IP20
Air pressure (operation)	70 kPa ... 108 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)	66 kPa ... 108 kPa (up to 3500 m above sea level)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	10 % ... 75 % (on average, 85% infrequently, non-condensing)
Permissible humidity (storage/transport)	10 % ... 75 % (non-condensing)