AXL F IMPULSE2 XC 1H - Special function module Phoenix Contact

Mã sản phẩm: 2702655

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

Axioline F XC, Function module, 2 digital pulse interfaces for evaluating magnetostrictive position sensors with start/stop interface, Transmission speed in the local bus 100 MBit/s, Degree of protection IP20, including bus base module and Axioline F connectors

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Dimensional drawing
Width	35 mm
Height	126.1 mm
Depth	54 mm
Note on dimensions	The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).

Color

traffic grey A RAL 7042

Axioline F local bus
Number of interfaces	2
Connection method	Bus base module
Transmission speed	100 Mbps

Module
Input address area	46 Byte
Output address area	46 Byte
Required parameter data	1 Byte
Required configuration data	7 Byte

Digital
Input name	Digital inputs
Description of the input	EN 61131-2 types 1 and 3
Number of inputs	4
Connection method	Push-in connection
Connection technology	1-conductor
Input voltage range "0" signal	-3 V DC ... 5 V DC
Input voltage range "1" signal	11 V DC ... 30 V DC
Nominal input voltage U_IN	24 V DC
Nominal input current at U_IN	2.4 mA
Input filter time	250 µs
		1000 µs
		3000 µs
Protective circuit	Polarity reversal protection of the inputs; parallel diode (30 V, 5 s)

Type	block modular
Product type	I/O component
Product family	Axioline F

Encoder
Number	2
Nominal output voltage	24 V DC (U_I - 0.5 V)
Voltage range	19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current carrying capacity	typ. 500 mA
Protective circuit	Surge protection; electronic (35 V, 0.5 s)
		Short-circuit protection; electronic
		Transient protection; Shielding
Potentials: Axioline F local bus supply (U_Bus)
Supply voltage	5 V DC (via bus base module)
Current draw	max. 150 mA
Power consumption	max. 0.75 W
Potentials: Feed-in of supply voltage (U_I)
Supply voltage	24 V DC
Supply voltage range	19.2 V DC ... 30 V DC including all tolerances, including ripple
Current draw	max. 30 mA (Supply of pulse interface, without encoder supply)
Power consumption	max. 0.72 W (Supply of pulse interface, without encoder supply)
Protective circuit	Surge protection; electronic (35 V, 0.5 s)
		Reverse polarity protection; Polarity protection diode
		Transient protection; Suppressor diode

Connection technology
Connection name	Axioline F connector
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
Conductor connection
Connection method	Push-in connection
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Stripping length	8 mm
Axioline F connector
Connection method	Push-in connection
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
Conductor cross section, rigid	0.2 mm² ... 1.5 mm²
Conductor cross section, flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Stripping length	8 mm

Ambient conditions
Ambient temperature (operation)	-25 °C ... 60 °C (Standard)
Ambient temperature (operation)		-40 °C ... 70 °C (Extended, see section “Tested successfully: use under extreme ambient conditions” in the data sheet.)
Degree of protection	IP20 (per manufacturer's declaration)
Air pressure (operation)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)