AXL F DO4/3 AC 1F - Digital module Phoenix Contact

Mã sản phẩm: 2702068

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

Axioline F, Digital output module, Digital outputs: 4 (Triac outputs with zero voltage switch), 230 V AC, 2 A, connection technology: 3-conductor, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Dimensional drawing
Width	53.6 mm
Height	126.1 mm
Depth	54 mm
Note on dimensions	The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).

Color

traffic grey A RAL 7042

Axioline F local bus
Number of interfaces	2
Connection method	Bus base module
Transmission speed	100 Mbps

Module
Input address area	0 Byte
Output address area	1 Byte
Required parameter data	1 Byte
Required configuration data	6 Byte

Digital
Output name	Digital outputs
Connection method	Push-in connection
Connection technology	3-conductor
Number of outputs	4 (Triac outputs with zero voltage switch)
Protective circuit	External protection required; I²t-value (a half-wave): 340 A²s
Output voltage	230 V AC
Maximum output current per module	8 A (provide external protection)
Nominal output voltage	230 V AC
Output voltage when switched off	see diagram
Nominal load, ohmic	max. 460 W (at nominal voltage)
Switching frequency	max. 100 per second (with ohmic load)
Reverse voltage resistance to short pulses	Reverse voltage proof
Behavior with overload	Output may be damaged

Type	block modular
Product type	I/O component
Product family	Axioline F
Mounting position	any (observe temperature and current derating)
Scope of delivery	including bus base module and Axioline F connectors

Potentials: Axioline F local bus supply (U_Bus)
Supply voltage	5 V DC (via bus base module)
Current draw	max. 120 mA
Power consumption	max. 600 mW
Potentials: Supply for digital output modules (U_O)
Supply voltage	230 V AC
Supply voltage range	12 V AC ... 253 V AC (including all tolerances, including ripple, 50 ... 60 Hz)
Current draw	max. 8 A (provide external protection)
Power consumption	max. 2024 VA (of which 8 VA internal losses)
Protective circuit	Surge protection; Varistor 275 V

Connection technology
Connection name	Axioline F connector
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual. When selecting the cables, please note that in the case of a small conductor cross section and high current, the terminal point temperature may be up to 30 K above the ambient temperature.
Conductor connection
Connection method	Push-in connection
Conductor cross section rigid	0.5 mm² ... 1.5 mm²
Conductor cross section flexible	0.5 mm² ... 1.5 mm²
Conductor cross section AWG	20 ... 16
Stripping length	8 mm
Axioline F connector
Connection method	Push-in connection
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual. When selecting the cables, please note that in the case of a small conductor cross section and high current, the terminal point temperature may be up to 30 K above the ambient temperature.
Conductor cross section, rigid	0.5 mm² ... 1.5 mm²
Conductor cross section, flexible	0.5 mm² ... 1.5 mm²
Conductor cross section AWG	20 ... 16
Stripping length	8 mm

Ambient conditions
Ambient temperature (operation)	-25 °C ... 60 °C (max. 2 A/channel for wall mounting on horizontal DIN rail; max. 1 A/channel for any mounting position)
Ambient temperature (operation)		-25 °C ... 50 °C (max. 2 A/channel for any mounting position)
Degree of protection	IP20
Air pressure (operation)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)