AXL F BK ETH XC - Bus coupler Phoenix Contact

Mã sản phẩm: 2701949

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

Axioline F, Bus coupler, Modbus/TCP(UDP), RJ45 jack, Extreme conditions version, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connector

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Dimensional drawing
Width	45 mm
Height	126.1 mm
Depth	74 mm
Note on dimensions	The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).

Color

traffic grey A RAL 7042

Modbus/TCP (UDP)
Number of interfaces	2
Connection method	RJ45 jack
Note on the connection method	Auto negotiation and autocrossing
Transmission speed	10/100 Mbps (Half or full duplex mode (automatic detection, can be adjusted manually))
Transmission physics	Ethernet in RJ45 twisted pair
Axioline F local bus
Number of interfaces	1
Connection method	Bus base module
Transmission speed	100 Mbps
Service
Number of interfaces	1
Connection method	USB type C (from HW 02)
Connection method		Micro USB type B (up to HW 01)

System limits
Number of supported devices	max. 63 (per station)
Number of local bus devices that can be connected	max. 63

Type	block modular
Product type	I/O component
Product family	Axioline F
Mounting position	any (observe temperature derating)
Scope of delivery	including bus base module and Axioline F connector
Insulation characteristics
Overvoltage category	II (IEC 60664-1, EN 60664-1)
Pollution degree	2 (IEC 60664-1, EN 60664-1)

Potentials: Communications power U_L feed-in (the supply of the Axioline F local bus U_Bus is generated from U_L)
Supply voltage	24 V DC
Supply voltage range	19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw	max. 583 mA (2 A at U_Bus, U_L = 24 V, up to HW 01)
		max. 670 mA (2.5 A at U_Bus, U_L = 24 V, HW 02 or later)
		max. 583 mA (2.0 A at U_Bus, U_L = 24 V, applications with UL approval, use in zone 2 potentially explosive area)
Power consumption	max. 14 W (2 A at U_Bus, U_L = 24 V, up to HW 01)
Power consumption		max. 16 W (2.5 A at U_Bus, U_L = 24 V, HW 02 or later)
Protective circuit	Surge protection; electronic
Protective circuit		Reverse polarity protection; electronic
Potentials: Axioline F local bus supply (U_Bus)
Supply voltage	5 V DC (via bus base module)
Power supply unit	max. 2 A (up to HW 01)
		max. 2.5 A (from HW 02)
		max. 2 A (Applications with UL approval, use in zone 2 potentially explosive area)

Connection technology
Connection name	Axioline F connector
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
Conductor connection
Connection method	Push-in connection
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Stripping length	8 mm
Axioline F connector
Connection method	Push-in connection
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
Conductor cross section, rigid	0.2 mm² ... 1.5 mm²
Conductor cross section, flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Stripping length	8 mm

Ambient conditions
Ambient temperature (operation)	-25 °C ... 60 °C (Standard, applications with UL approval, use in zone 2 potentially explosive area; mounting position: wall mounting on horizontal DIN rail)
		-25 °C ... 55 °C (Standard, applications with UL approval, use in zone 2 potentially explosive area; mounting position: any)
		-40 °C ... 70 °C (Extended, see section “Tested successfully: use under extreme ambient conditions” in the data sheet.)
Degree of protection	IP20
Air pressure (operation)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)

Protection class

III (IEC 61140, EN 61140, VDE 0140-1)

ATEX
Identification	 II 3 G Ex ec IIC T4 Gc
Certificate	UL 20 ATEX 2441X
UKEX
Identification	 II 3 G Ex ec IIC T4 Gc
Certificate	PxCIMA22UKEX2701949X
IECEx
Identification	Ex ec IIC T4 Gc
Certificate	IECEx ULD 20.0026X
UL, USA/Canada
Identification	cULus
Certificate	E238705
UL Ex, USA / Canada
Identification	Class I, Zone 2, AEx ec IIC T4
		Class I, Division 2, Groups A, B, C, D, T4
		Ex ec IIC T4 Gc X
Certificate	E366272
CCC / China-Ex
Identification	Ex ec IIC T4 Gc
Certificate	, 2021122309114456