AXL F BK EIP - Bus coupler Phoenix Contact

Mã sản phẩm: 2688394

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

Axioline F, Bus coupler, EtherNet/IP™, RJ45 jack, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connector

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Dimensional drawing
Width	45 mm
Height	126.1 mm
Depth	74 mm
Note on dimensions	The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).

Color

traffic grey A RAL 7042

EtherNet/IP™
Number of interfaces	2
Connection method	RJ45 jack
Note on the connection method	Auto negotiation and autocrossing
Transmission speed	10/100 Mbps (Half or full duplex mode (automatic detection, can be adjusted manually))
Transmission physics	Ethernet in RJ45 twisted pair
Axioline F local bus
Number of interfaces	1
Connection method	Bus base module
Transmission speed	100 Mbps
Service
Number of interfaces	1
Connection method	USB type C (from HW 05)
Connection method		Micro USB type B (up to HW 04)
Fieldbus: Local bus gateway
Max. number of local bus devices	63 (Consider the logic current consumed by the devices)

System limits
Number of supported devices	max. 63 (per station)
Number of local bus devices that can be connected	max. 63

Type	block modular
Product type	I/O component
Product family	Axioline F
Mounting position	any (observe temperature derating)
Scope of delivery	including bus base module and Axioline F connector
Insulation characteristics
Overvoltage category	II (IEC 60664-1, EN 60664-1)
Pollution degree	2 (IEC 60664-1, EN 60664-1)

Maximum power dissipation for nominal condition	14 W
Potentials: Communications power U_L feed-in (the supply of the Axioline F local bus U_Bus is generated from U_L)
Supply voltage	24 V DC
Supply voltage range	19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw	max. 583 mA (2.0 A at U_Bus, U_L = 24 V, up to HW 04)
Current draw		max. 670 mA (2.5 A at U_Bus, U_L = 24 V, HW 05 or later)
Power consumption	max. 14 W (2.0 A at U_Bus, U_L = 24 V, up to HW 04)
Power consumption		max. 16 W (2.5 A at U_Bus, U_L = 24 V, HW 05 or later)
Protective circuit	Surge protection; electronic
Protective circuit		Reverse polarity protection; electronic
Potentials: Axioline F local bus supply (U_Bus)
Supply voltage	5 V DC (via bus base module)
Power supply unit	max. 2 A (up to HW 04)
Power supply unit		max. 2.5 A (from HW 05)

Connection technology
Connection name	Axioline F connector
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
Conductor connection
Connection method	Push-in connection
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Stripping length	8 mm
Axioline F connector
Connection method	Push-in connection
Note on the connection method	Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
Conductor cross section, rigid	0.2 mm² ... 1.5 mm²
Conductor cross section, flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Stripping length	8 mm

Ambient conditions
Ambient temperature (operation)	-25 °C ... 60 °C (Mounting position: wall mounting on horizontal DIN rail)
Ambient temperature (operation)		-25 °C ... 55 °C (Mounting position: any)
Degree of protection	IP20
Air pressure (operation)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)